Page 1
Rhino Motor Technologies Inc. provides customers with comprehensive technical support. Users can contact the nearest customer service center of the Rhino Motor Technologies Inc, or directly contact the company headquarters. All rights reserved. We reserve the right to modify the content without further notice.
Page 2
Preface Thank you for purchasing the RHINO 1000 Electric Outboard. The RHINO 1000 Electric Outboard system produced by Rhino Motor Technologies Inc. embodies the most advanced driving technology and efficiency and undergoes extensive testing before delivery. Rhino Motor Technologies Inc. welcomes your feedback on the design and use of our products.
Page 3
4.2.1 Manual interface ......................18 4.2.2 Smart Interface ......................... 19 4.3 Throttle operation ........................ 20 5 Battery Charging and Charger Usage ..................22 5.1 Remove battery ........................22 5.2 Charging ..........................22 RHINO 1000 electric outboard user manual Page of 31...
Page 4
7.1 Transportation ........................28 7.3 Storage of the Outboard Battery ..................29 8 Warranty............................ 30 8.1 Warranty Policies ........................ 30 8.2 Situation not covered by the warranty ................30 8.3 Warranty Claim Process...................... 30 RHINO 1000 electric outboard user manual Page of 31...
Page 5
1 Product Overview 1.1 Names of system main components Figure 1-1 RHINO 1000 electric outboard user manual Page of 31...
Page 6
Use and storage temperature (environment) Charge:0℃~45℃ Discharge:-20℃~55℃ Storage:-10℃~35℃ Charger model XSG5463000 Battery Charger Rated Power 163.8W Output Voltage 54.6V Output current 3.0A Charge termination current ≦0.3A Rated input voltage (frequency) 100~240V(50/60Hz) Maximum input current 1.9A@220V RHINO 1000 electric outboard user manual Page of 31...
Page 7
If using a single outboard motor, please fix the main unit at the center line position of the boat hull. If using two or more outboard motors, the distance between the outboard motors should be no less than 600mm RHINO 1000 electric outboard user manual Page...
Page 8
1. Insert the front part of the control handle into the middle of the Battery base, as shown in Figure 2-5, aligning the alignment mark, the red part in Figure 2-6. Insert the base pivot axis RHINO 1000 electric outboard...
Page 9
When connecting the cables, please align with the positioning holes and avoid applying excessive force. Keep the inside of the plug and socket dry. After installation, always check whether the components are firmly secured. RHINO 1000 electric outboard user manual...
Page 10
Figure 3-3. The battery indicator light will turn on, and after the system self-checks, the battery system will supply power to the propulsion system, and the touch screen will light up. Safety switch Figure 3-1 Figure3-2 RHINO 1000 electric outboard user manual Page of 31...
Page 11
Only after confirming that the entire system is functioning properly and securely should you proceed with full-speed operation. When the handle is pushed to the right, the boat turns left; when the handle is pushed to RHINO 1000 electric outboard user manual...
Page 12
1. Grip the machine by hand, pull out the Pitch Wrench from the hole, and lift it up, as shown in Figure 3-9. 2. Slowly lower the machine to the raised angle (angle with the transom angle of about 89°), then RHINO 1000 electric outboard user manual...
Page 13
Figure 3-11 Figure3-12 The RHINO 1000 electric outboard has eight adjustable pitch angles: 0°, 9.5°, 19°, 28.5°, 38°, 47.5°, and 89° (see Figure 3-11). During normal use, adjust the pitch angle to an appropriate position according to the actual situation.
Page 14
When increasing speed, it is necessary to always observe the water flow at the stern of the boat. If abnormal water flow (such as cavitation) occurs, please stop the machine immediately and raise the outboard motor. RHINO 1000 electric outboard user manual...
Page 15
Under normal circumstances, it is generally not necessary to set the outboard motor to beach mode. Beach mode should be considered when navigating in complex environments with underwater obstacles such as dense vegetation, reefs, or shallow water. RHINO 1000 electric outboard user manual...
Page 16
Fold up the handle, as shown in Figure 3-19: Pull the handle to the left with force until it reaches its limit position, then push it down. Fold down the handle for easy storage and transportation. RHINO 1000 electric outboard user manual...
Page 17
4 Electric Control System RHINO 1000 electric outboard motors are equipped with intelligent control electrical systems, which perfectly realize functions such as throttle control, safety checks, battery information interaction and GPS positioning. 4.1 System power-up Power switch Figure 4-1 Touch the power switch lightly, the indicator light will light up. After the battery system self-test is completed, the electrical system will start to supply power, as shown in Figure 4-1.
Page 18
As the battery management system (BMS) status display, 27% in the figure represents the accurate state of charge (SOC) value. This is the display for the boat's system speed. Unit: knots RHINO 1000 electric outboard user manual Page of 31...
Page 19
4.2.2 Smart Interface Figure 4-3 The RHINO 1000 electric outboard motor is equipped with an intelligent operating mode: in the Smart interface, the operator selects either Speed or Range (only one option can be selected). After the selection is completed, the system selects the corresponding mileage and speed based on the battery level to ensure that it meets the operational needs of the user.
Page 20
On the Smart page, click on the highlighted area within the Speed or Range box, and the highlighting will disappear, indicating that the Smart mode has been exited and switched to the handle throttle mode. 4.3 Throttle operation Forward Reverse Forward Reverse RHINO 1000 electric outboard user manual Page of 31...
Page 21
(facing the handle direction), as shown in figure 4-6. When increasing the throttle, please ask the operator to sit firmly in their seat. Please ensure that the safety switch is connected to the wrist or life jacket. RHINO 1000 electric outboard user manual Page...
Page 22
As shown in Figure 5-3, connect the charger to the plug and the Battery charging port respectively for charging. charging plug Charger cable Battery charging port Battery indicator light Figure 5-3 The charger and the battery indicator light characteristics during charging are explained as the following table. RHINO 1000 electric outboard user manual Page of 31...
Page 23
Fully charged Trickle current 0.3A >0 54.6V Green Battery indicator light status during charging Battery level Green indicator Green indicator Red indicator light 1 light 2 light SOC≤10% 10%≤SOC≤80% 80%≤SOC Malfunction RHINO 1000 electric outboard user manual Page of 31...
Page 24
Before storing a lithium battery, please make sure it is turned off (press and hold the power button for more than 5 seconds until the power indicator goes off). • It is recommended to recharge the battery immediately after each use, regardless of how much RHINO 1000 electric outboard user manual...
Page 25
3. Remove any debris wrapped around the propeller, such as fishing nets, fishing lines, and water plants. Figure 6-1 shows an installation diagram of the propeller. To remove the propeller, follow the reverse steps of the diagram. RHINO 1000 electric outboard user manual Page...
Page 26
There are 4 steps to replace the stern fin which shown in Figure 6-5 1. Loosen the Fin screws on both sides of the Stern fin, there are a total of 4 screws. 2. Remove the Stern fin. 3. Insert the new Stern fin. RHINO 1000 electric outboard user manual Page...
Page 27
1. Lift the control handle and unplug the screen kit cable connector located underneath the handle, as shown in Figure 6-7. 2. Rotate the Screen kit screw counter clockwise, pull out the Screen kit pull ring , and lift the screen upwards, as shown in Figure 6-8. RHINO 1000 electric outboard user manual Page...
Page 28
For transportation, it is recommended to use the packaging methods shown in Figure 7-1 and Figure 7-2: Figure 7-1 Packaging method for transporting the main engine Figure 7-2. Packaging method for transporting battery RHINO 1000 electric outboard user manual Page of 31...
Page 29
80% and a temperature between 0℃ and 45℃. A long-term storage temperature above 45℃ will have a corresponding impact on the service life of the lithium battery. Avoid direct sunlight. RHINO 1000 electric outboard user manual Page...
Page 30
2 years (or 24 months) from date of delivery to the first user. ▪ Customer can return RHINO 1000 product within 30 days as long as the condition of the product does not affect its secondary sales.
Page 31
Note that any delivery cost incurred in the process is at your charge. If warranty expires, you can still enjoy maintenance services or buy spare parts from dealers with minimum maintenance charge. RHINO 1000 electric outboard user manual Page...
Need help?
Do you have a question about the 1000 and is the answer not in the manual?
Questions and answers