Page 2
Welcome to Caspian Series 4G Register your Roksan products to ensure the best possible product and customer support Thank you for purchasing Caspian Series 4G, you’re now ready to start your journey to breathtaking sound. Register your product using the QR code Caspian Series 4G is built for the user.
Page 3
Unboxing Before you unpack your product, please make sure that there is plenty of clean surface area available. Inside the box Caspian Streaming Amplifier / Caspian Integrated Amplifier Remote Control (incl. 2 x AAA batteries) Mains Power Cord Quick Start Guide Safety Instructions 240v 110v...
Page 5
Connections overview Inputs Caspian Streaming Amplifier Moving Analogue Analogue Digital HDMI® Ethernet Magnet Coaxial Left Loudspeaker Right Loudspeaker Caution: For continued protection against risk of fire, replace only with same fuse type and rating. Appliance must be earthed. Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord.
Page 6
Input connections Phono Input USB Input (Caspian Streaming Amplifier only) This product has a built-in Moving Magnet phono stage for use with turntables. If using a Connect a USB stick or external hard drive with music stored for playback via the BluOS app. Moving Coil Cartridge, you will need an external phono stage that can be connected to one of the other analogue inputs.
Page 7
Output connections Balanced XLR Outputs - Pre-Out 1 These connections may be used for connecting a power amplifier or subwoofer. It is recommended to use balanced outputs over long cable runs over 10m. RCA Analogue Outputs - Pre-Out 2 & 3 There are 2 pairs of RCA outputs on amplifier.
Page 8
Remote control Mute Toggles the mute on and off. The display will change to show there is no output. Volume Up Adjusts the output volume of the amplifier. The number of bars on the display will increase to show the volume is increasing. Previous Track/ Go to the start of the track or the previous track.
Page 9
Setting up MaestroUnite The MaestroUnite app will allow you to enjoy your Caspian Streaming / Integrated Amplifier to its fullest potential. The app allows for Wi-Fi setup, input/output configuration, audio adjustments, firmware updates and system creation with additional Roksan or Monitor Audio products. Select the product you want to connect to from the list of available products in range.
Page 10
Adding additional equipment to your system Adding a power amplifier If adding a subwoofer to your stereo system to create a 2.1 system connect the subwoofer to If you wish to add a power amplifier to the Caspian Streaming / Integrated Amplifier and use that Pre-Out 3 of the Caspian Amplifier and follow the MaestroUnite configuration instructions below: in either a bi-amp configuration or even using the amplifier as a pre-amplifier you can.
Page 11
Input and volume selection Selecting Inputs All inputs can be selected using either the rotary encoder on the front of the amplifier, the remote or (if you have the Streaming Amplifier) BluOS. Unused inputs can be hidden in MaestroUnite. If using the Streaming or Integrated Amplifier in AV Bypass mode (configured in the settings menu Change Source or MaestroUnite) you will need to connect the processor to A2.
Page 12
Setting up & using BluOS To take full advantage of the Caspian Streaming Amplifier’s capabilities and features, you can use it as a music streamer with the BluOS app. The app can be downloaded from the App Store or Google Play. Once downloaded follow the on-screen instructions to install and set up the app for use with your Caspian Streaming Amplifier.
Page 13
On-screen menu The on-screen menu of the Caspian Streaming / Integrated Amplifier opens quick access to Sensitivity several features. To access them, press the Settings Menu button on the remote (item 11 on page If the input level on the analogue devices is different to other inputs, the sensitivity can be 12).
Page 14
Changing remote battery To access the battery compartment and change the battery, use a coin or similar to rotate the locking mechanism at the bottom of the remote (circled below) clockwise to release it. Once released, the batteries are accessible. The remote accepts 2 x AAA 1.5 V batteries.
Page 15
Care & maintenance Warranty After disconnecting the product from the mains supply, the casing and front panel may be In the unlikely event that there is a defect with this product, it is covered by the Roksan cleaned with a lint-free cloth. Avoid using abrasive substances or solvents. manufacturer’s warranty, provided that the product was supplied by an authorised Roksan retail specialist.
Page 16
Pre-Amplifier Section (Pre3) Specifications Volume Control Technology Digital Volume Control Matching <0.25 dB THD+N (3.9 VRMS, A - Weighted) <0.003 % Integrated Amplifier Streaming Amplifier Signal to Noise Ratio (3.9 VRMS, >108 dB A-Weighted) Connectivity Summary Maximum Output Level 3.9 VRMS Analogue Inputs 2 x RCA Stereo (A1, A2) 2 x RCA Stereo (A1, A2)
Page 17
Directives Other Monitor Audio Group declares that the apparatus “Caspian Streaming Wired IR Input 5 - 14 V, Mono 3.5 mm jack plug, any polarity 12 V Trigger Input 5 - 14 V, 3.5 mm jack dual polarity Amplifier” and “Caspian Integrated Amplifier”. in conformity with the essential (On / Standby) requirements and other relevant provisions of Directive 2014/53/EU ”.
Need help?
Do you have a question about the Caspian 4G Series and is the answer not in the manual?
Questions and answers