Chapter 14 IGMP
Table 61 Network Settings > IGMP Setting > IGMP ACL (continued)
LABEL
Apply
Cancel
14.4.1 IGMP ACL Add
Use this screen to configure the multicast IP address of a multicast media channel
to which you want to block or allow access. Click Network Settings > IGMP
Setting > IGMP ACL > Add a new rule to open the following screen.
Figure 88 Network Settings > IGMP Setting > IGMP ACL > Add a new rule
The following table describes the fields in this screen.
Table 62 Network Settings > IGMP Setting > IGMP ACL > Add a new rule
LABEL
Multicast IP
Address
Multicast IP Mask Enter the subnet mask of the multicast IP address.
Type
Apply
Cancel
214
DESCRIPTION
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Enter the multicast IP address of a multicast media channel to which
you want to block or allow access.
Select Black List to have this entry block access to the specified
multicast IP address.
Select White List to have this entry allow access to the specified
multicast IP address.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
VSG1435-B101 Series User's Guide