Download Print this page

Roline 14.01.3642 User Manual

Hdmi over ip extender 4k30hz rx+tx, 120m, w/ir

Advertisement

Quick Links

ROLINE HDMI over IP Extender 4K30Hz Rx+Tx, 120m, W/IR
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please
keep this manual for future reference.
Introduction
With this HDMI™ video extender, you can extend HDMI™ signals or DVI signals (with an
HDMI™-DVI adapter, not included) up to 120 m for Ultra HD (4K@30Hz) video over a
single Cat 5e/6 cable. An ideal solution for sharing a screen or projector over a LAN
network, allowing a video source to be connected without a digital video output. IR signals
from the remote control of the video source can also be redirected - perfect for controlling
your video source from your video destination.
Features
2 extension modes: simple mode (1:1), allocation mode (1: N)
Following TCP/IP standard
Resolutions up to 480p/720p/1080i/1080p/4K@30Hz
Max video bandwidth to 3.4Gbps/340MHz per channel (10.2Gbps all channels)
Cat 5e/6 cable needs to follow the standard of IEEE-568B
Supports 3D
Package Content
Main Unit Transmitter (TX)
Main Unit Receiver (RX)
Adapter
User Manual
14.01.3642
1x
1x
2x

Advertisement

loading
Need help?

Need help?

Do you have a question about the 14.01.3642 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roline 14.01.3642

  • Page 1 User Manual ROLINE HDMI over IP Extender 4K30Hz Rx+Tx, 120m, W/IR 14.01.3642 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
  • Page 2 Ports and Interfaces Receiver (RX) Transmitter (TX) 1. OUTPUT: HDMI Output 2. IR IN: IR Signal Input 3. RESET: Restart 4. DC 5V: Power LED Indicator 5. DC/5V: DC 5V In 6. HDMI Signal Status LED Indicator If the HDMI signal is being transmitted normally, the LED indicator is on If there is no HDMI signal, the LED indicator is off.
  • Page 3 Connection Diagram Specification Input Port HDMI x1, IR IN x1 Output Port HDMI x1, IR OUT x1 Extensions Distance 120m at 4K@30Hz USB transmission rate 480Mbps Vertical Frequency Range 50/60Hz Interlaced Resolutions 1080i (50&60Hz) Progressive Resolutions 480p,576p,720p,1080p,4K@30Hz (50&60Hz) Operating Temperature 0℃...
  • Page 4 IP address setting: Note: the IP address of the sender is fixed to 192.168.101.110, and the IP address of the receiver is random. Transmitter (TX): Receiver (RX):...
  • Page 5 Troubleshooting Problems Causes Solutions No power /all LEDs off Maybe the power supply is Please check if the power not connected well or the supply is connected wrong power adapter is correctly and the output used. voltage value is correct No sound or sound issues Maybe the HDMI Please check if the HDMI...