Roline 12.04.1102 User Manual

Usb 2.0 cat. extender 50m power over cable

USB 2.0 Cat. Extender 50m

Power Over Cable

12.04.1102

User Manual

INTRODUCTION

Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0

Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at

data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).

Setting up the USB 2.0 Extender is quite simple. Plug the RJ-45 connectors into

the ports. It takes only minutes to setup, and there is no configuration necessary.

The Extender is USB 2.0 compliant and is backward compatible with USB 1.1/1.0.

Before installation, please check if following items are included in the package:

USB AM-BM cable

User Manual

Power Adapter (24V/0.5A) X1

Table of Contents

Do you have a question about the 12.04.1102 and is the answer not in the manual?

Page 1 USB 2.0 Cat. Extender 50m Power Over Cable 12.04.1102 User Manual INTRODUCTION Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0 Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).
Page 2 FEATURES Supports date transfer rates of 1.5Mb/s, 12Mb/s, 480Mb/s Product consists of two electronic modules, a "Transmitter unit" and a "Receiver unit". Receiver unit can connect 1 USB 2.0 device. Units can be connected by a standard Cat. 5 cable or higher, which extends USB devices up to 50m.
Page 3 Receiver Unit ITEM TYPE DESCRIPTION PWR LED (Red) LED turns on when power supply is from Transmitter unit. Off when no power is supplied. LINK LED (Green) Indicates that a valid interconnection between Transmitter Unit and Receiver Unit is established via LAN cable ACT.
Page 4 3. Connect the USB 2.0 Extender Transmitter Unit and Receiver Unit together with a LAN Cable (supplied by user). 4. Connect USB Device(s) to the Receiver Unit. 5. Check the LED on the USB 2.0 Extender Receiver Unit. Make sure that the ACT.

12.04.1102-4