Roline 12.04.1101 User Manual

Usb 2.0 4-port extender kit 50m power over cable

USB 2.0 4-port Extender Kit 50m

INTRODUCTION

Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0

Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at

data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).

Setting up the USB 2.0 Cat.5 Extender is quite simple. Plug the RJ-45 connectors

into the ports. It takes only minutes to setup, and there is no configuration

necessary. The Extender is USB 2.0 compliant and is backward compatible with

USB 1.1/1.0.

Before installation, please check if following items are included in the package:

User Manual

Power Adapter (24V/0.5A)

USB AM-BM cable

Power Over Cable

12.04.1101

User Manual

Table of Contents

Do you have a question about the 12.04.1101 and is the answer not in the manual?

Page 1 USB 2.0 4-port Extender Kit 50m Power Over Cable 12.04.1101 User Manual INTRODUCTION Congratulations on your purchase of this USB 2.0 Extender. This USB.2.0 Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).
Page 2 FEATURES Supports date transfer rates of 1.5Mb/s, 12Mb/s, 480Mb/s. Product consists of two electronic modules, a "Transmitter unit" and a "Receiver unit". Receiver unit is built in 4- port hub to connect (4) USB 2.0 devices. Units can be connected by a standard Cat. 5 cable or higher, which extends USB devices up to 50m.
Page 3 Receiver Unit ITEM TYPE DESCRIPTION PWR LED (Red) LED turns on when power supply is from Transmitter unit. Off when no power is supplied. LINK LED (Green) Indicates that a valid interconnection between Transmitter Unit and Receiver Unit is established via LAN cable ACT.
Page 4 INSTALLATION 1. Connect the Transmitter Unit to the Host System (or PC) via an USB Cable (A Male to B Male). 2. Plug the 24V/0.5A DC Power Supply into the USB 2.0 Extender Transmitter Unit. Plug the AC power cord of the power supply into an available electrical outlet.

12.04.1101-4