Advertisement
INTRODUCTION
Congratulations on your purchase of the USB 2.0 Extender. This USB.2.0 Extender
is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate
of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).
Setting up the USB 2.0 Cat.5 Extender is quite simple. Using the RJ-45 Connector,
plugging it in the connections without confusion or difficulty. It takes only minutes to
setup, and there is no configuration necessary, like all USB hardware. The USB 2.0
Extender is USB 2.0 compliant and it is backward compatible with USB 1.1/1.0.
PACKAGE CONTENT
Before installation, please check the items of the package.
Local Unit with USB Cable
Remote Unit
User Manual
Power Adapter (5V, 2A)
FEATURES
Support for any Hi-Speed (480Mb/s), Full Speed (12 Mb/s) or Low Speed (1.5
Mb/s) USB devices.
Allows a USB device to have its cable length extended up to 50m
Supports suspend/resume detection
Supports Hot Plug
No software driver required
USB 2.0 Extender over RJ-45,
max. 50m
12.04.1100
User Manual
X1
X1
X1
X1
Advertisement
Table of Contents
Related Manuals for Roline 12.04.1100
Summary of Contents for Roline 12.04.1100
- Page 1 USB 2.0 Extender over RJ-45, max. 50m 12.04.1100 User Manual INTRODUCTION Congratulations on your purchase of the USB 2.0 Extender. This USB.2.0 Extender is capable of sending data across a Cat.5/5e/6 cable up to 50 meters at data rate of Hi-Speed (480Mb/s), Full Speed (12Mb/s) and Low Speed (1.5Mb/s).
- Page 2 INSTALLATION 1. Connect the Local Unit to the Host System (or PC) via the supplied USB Cable on Local Unit. 2. Connect the USB 2.0 Extender Local Unit and Remote Unit together with a Cat.5, Cat 5e or Cat. 6 Cable (supplied by user). 3.
Need help?
Do you have a question about the 12.04.1100 and is the answer not in the manual?
Questions and answers