User Account; Figure 5-7 User Account; Table 5-5 Radius Add New Network Address - ZyXEL Communications VANTAGE RADIUS 50 User Manual

LABEL
Allowed Network Address
Network Address
Netmask
Shared Secret
Description
Apply
5.7

User Account

Click RADIUS and then USER ACCOUNT to begin adding user accounts to your RADIUS server. Each
client requiring access to the wireless network needs a username and password.
The following table describes the labels in this screen.
RADIUS Configuration

Table 5-5 RADIUS Add New Network Address

Type the first address in your network. This is the start address from which
Vantage RADIUS uses the Netmask to allow access from many APs.
This field displays subnet mask used to specify the network range limits for
accepted IP addresses.
Type a password as the key to be shared.
The key must be the same on Vantage RADIUS as the wireless AP's on your
network. The key is not sent over the network.
Type a name to identify your wireless AP network in the Allowed Network
Address list.
Click this button to save changes back to Vantage RADIUS and return to the
RADIUS SERVER screen.

Figure 5-7 User Account

Vantage RADIUS Server User's Guide
DESCRIPTION
5-11