ZyXEL Communications USG-300 - V2.20 ED 2 Manual page 332

Chapter 13 Interfaces
Table 71 Configuration > Network > Interface > WLAN > Add (No Security)
LABEL
IP Address
Subnet Mask
Interface
Parameters
Egress
Bandwidth
Ingress
Bandwidth
MTU
DHCP Settings
DHCP
Relay Server 1 Enter the IP address of a DHCP server for the network.
Relay Server 2 This field is optional. Enter the IP address of another DHCP server for
IP Pool Start
Address
332
DESCRIPTION
Enter the IP address for this interface.
Enter the subnet mask of this interface in dot decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can send through the interface to the network. Allowed values
are 0 - 1048576. This setting is used in WAN load balancing and
bandwidth management.
This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can receive from the network through the interface. Allowed
values are 0 - 1048576.
Maximum Transmission Unit. Type the maximum size of each data
packet, in bytes, that can move through this interface. If a larger
packet arrives, the ZyWALL divides it into smaller fragments. Allowed
values are 576 - 1500. Usually, this value is 1500.
Select what type of DHCP service the ZyWALL provides to the wireless
network. Choices are:
None - the ZyWALL does not provide any DHCP services. There is
already a DHCP server on the network.
DHCP Relay - the ZyWALL routes DHCP requests to one or more
DHCP servers you specify. The DHCP server(s) may be on another
network.
DHCP Server - the ZyWALL assigns IP addresses and provides subnet
mask, gateway, and DNS server information to the network. The
ZyWALL is the DHCP server for the network.
These fields appear if the ZyWALL is a DHCP Relay.
the network.
These fields appear if the ZyWALL is a DHCP Server.
Enter the IP address from which the ZyWALL begins allocating IP
addresses.
If this field is blank, the ZyWALL assigns every IP address allowed by
the interface's IP address, subnet mask, and pool size; except for the
first address (network address), last address (broadcast address) and
the interface's IP address.
ZyWALL USG 300 User's Guide