Download Print this page

abc Triple Crown Silver WaterFed Pole Operation And Maintenance Manual

Advertisement

Quick Links

Triple Crown
Silver WaterFed Pole
Effective November 2024
Getting Started With Your Pole
Operation and Maintenance
Manual
Overview
Congratulations on your purchase.
Thank you for selecting a Triple Crown Silver WaterFed®
Pole. Built with high quality materials and featuring
industry leading technology, we are sure that you'll enjoy
your new pole. This guide will run you through the basic
dos and don'ts of your pole along with instructions for
setting it up out of the box.
CAUTION
DON'T USE
NEAR ELECTRICITY!
®
CAUTION
DO NOT
DROP POLE!
In The Box
Parts Check
• Triple Crown Silver WaterFed® Pole
• Brush
• Pole Tubing w/ Pole Connector
• Double Plastic Angle Adaptor
• Shut-Off Valve
• Allen Wrench
1. Unpacking/Inspecting The Pole
Carefully remove the packaging material from around
your pole and discard. Examine all collars and sections
to make sure that nothing was damaged in shipping.
If damage has occurred, notify abc Window Cleaning
Supply within 48 hours. Some of the hardware on
your Triple Crown Silver Pole may have loosened in
shipping. Check that each clamp is firmly attached to
its base section using the allen wrench. Then adjust the
tension of the clamp using the thumbscrew. Hardware
should be tightened enough to keep collars on their
section without spinning - do not over tighten.
Triple Crown Silver WaterFed® Pole Operation and Maintenance Manual - 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Triple Crown Silver WaterFed Pole and is the answer not in the manual?

Questions and answers

Summary of Contents for abc Triple Crown Silver WaterFed Pole

  • Page 1 Examine all collars and sections to make sure that nothing was damaged in shipping. If damage has occurred, notify abc Window Cleaning Supply within 48 hours. Some of the hardware on your Triple Crown Silver Pole may have loosened in shipping.
  • Page 2 2. Initial Setup You can watch the video at: www.abcWindowSupply.com/SilverGuide Brush Double Angle Adaptor 1. Remove the metal tip by disengaging the 0 Collar. 2. Run the open end of your pole tubing through the bottom of your pole. Feed it through until it is coming out the top.