Advertisement
Quick Links
Triple Crown
Modular WaterFed Pole
Effective January 30, 2017
Getting Started With Your Pole
Operation and Maintenance
Manual
Overview
Congratulations on your purchase.
Thank you for selecting a Triple Crown Modular
WaterFed® Pole. Built with high quality materials and
featuring industry leading technology, we are sure
that you'll enjoy your new pole. This guide will run you
through the basic dos and don'ts of your pole along with
instructions for setting it up out of the box.
CAUTION
CAUTION
DO NOT
DO NOT
USE NEAR
STEP ON
ELECTRICITY!
SECTIONS!
®
In The Box
Parts Check
• Triple Crown Modular WaterFed® Pole
• Brush
• Pole Tubing w/ Pole Connector
• Double Plastic Angle Adaptor
• Shut-Off Valve
• PTFE Lubricant
• End Plug
• Pole Bag
CAUTION
1. Unpacking/Inspecting The Pole
Carefully remove the packaging material from around
your pole and discard. Examine all collars and sections
to make sure that nothing was damaged in shipping.
DO NOT
If damage has occurred, notify abc Window Cleaning
DROP POLE!
Supply within 48 hours.
Triple Crown Modular WaterFed® Pole Operation and Maintenance Manual - 1
Advertisement
Summary of Contents for abc Triple Crown Modular WaterFed Pole
- Page 1 Examine all collars and sections to make sure that nothing was damaged in shipping. DO NOT DO NOT DO NOT If damage has occurred, notify abc Window Cleaning USE NEAR STEP ON DROP POLE! Supply within 48 hours.
- Page 2 2. Initial Setup You can watch the video at: www.abcWindowSupply.com/ModularGuide Brush Double Angle Adaptor 1. Separate all sections. Some may be stored inside of each other. 2. Screw double angle adapter onto the end of your number one section. 3. Screw brush onto the euro threaded side of your Collar 1 double angle adapter.