Advertisement
Quick Links
NXT 4
Quick Start
Guide
Starting Out
When you first get started, this is
how your cart will look. The rest
of this guide will explain getting
from here to cleaning windows.
READ THIS
Read this guide before using
your system. Failure to follow
these directions voids all
warranties.
View the quick start video:
www.abcwindowsupply.com/nxt4quickstart
Attach Handle
Using tools (not included)
tighten nut on to handle bolt.
Advertisement
Related Manuals for abc NXT 4
Summary of Contents for abc NXT 4
- Page 1 READ THIS NXT 4 Read this guide before using Quick Start your system. Failure to follow these directions voids all Guide warranties. View the quick start video: www.abcwindowsupply.com/nxt4quickstart Starting Out When you first get started, this is how your cart will look. The rest of this guide will explain getting from here to cleaning windows.
- Page 2 RO Bypass Insert the tubing into the 1/4” fitting on the cartridges marked RO. The output end of the Bypass Hose can be run wherever you find best. Source Hose Connect your water source to the garden hose fitting on your Carbon/Sediment filter.
- Page 3 Pole Connect your pole using the quick connect/shut off valve provided with your system. Make sure the shut off valve is in the on position. Plug In Plug in your cart. Note: only follow this step if you are planning on using the pump. Turn On Water Close your bypass valve until only a trickle is coming out.
- Page 4 Turn On Pump Turn on the pump by pushing the on switch. Note: ensure water is flowing through the system before turning on the pump to avoid damaging your pump. Clean Windows Enjoy your NXT system! Shut Down Procedure When you are done using your system, fully open the bypass valve and close the shut off valve.