LiitoKala Lii-M4 User Manual page 14

3. When the battery is fully charged for the first time, the
system automatically switches to discharge, and the
discharge current is fixed at 500mA. At this time, the
system will record the discharge data to detect the
battery discharge capacity.
4. After the battery is discharged, the system will
automatically switch to charging, and the charger will
charge the battery again with the previously selected
current parameters. At this time, the system will not
record the charging capacity data, but will still display
the discharge stage capacity. The End indicator will flash
until fully charged, and finally the system will display End
and 100% to stop charging.
(Note: When using 1000mA current for charging, only
two channels can be used for charging, and only
lithium-ion batteries are available. If there are more than
two channels, the system will automatically reduce the
1000mA charging current to 500mA current for
charging; the discharge current is fixed at 500mA.)
https://efillooc.com Uncommon Lifestyle accessories.