Lenovo N27p User Manual page 18

Use the On-Screen Display (OSD) Control
When adjusting the settings, you can view the user controls through the OSD.
N27p
Basic Settings
Color Settings
Audio Settings
Port Settings
Menu Settings
Input: HDMI2
Use controls:
1. Press to open the OSD Main Menu.
2. Use or to move between icons. Select an icon and press
submenu, use or
adjustments, and then press
3. Press to exit the submenu in sequence, and then exit the OSD.
4. When OSD is not displayed, press
prevent accidental adjustment of the OSD. Press
adjustment.
5. DDC/CI is enabled by default. Press
The message "DDC/CI disable (DDC/CI enable)" is displayed on the screen.
Brightness
Contrast
DCR
Display Mode
HDR
Scaling Mode
Over Drive
Video range
Resolution: 3840*2160
to move between options, and then press
to save.
75
75
Off
Standard
Auto
Full Screen
Normal
Full range 0-255
and hold for 10 seconds to lock the OSD. In this way, you can
and hold for 10 seconds to unlock the OSD for OSD
and hold for 10 seconds to disable/enable the DDC/CI function.
Refresh Rate： 60Hz
to access the feature. If there is a
to select the feature. Use
Chapter 2. Adjusting and Using the Display 2-4
or to make