Advertisement
Quick Links
Advertisement
Related Manuals for Electrolux ENG7TE75S
Summary of Contents for Electrolux ENG7TE75S
- Page 1 EN User Manual | Fridge Freezer ENG7TE75S...
- Page 2 INSTALLATION (*mm) W min.30 ≥ 200 cm² (L*W) 1884 1894 min. 1112 ≥ 200 cm² min.30 (L*W) 1895 *710 1229 1884 90° 676-723 ≥ 200 cm² NOISES SSSRRR! BRRR! BLUBB! HISSS! CLICK!
- Page 3 Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, troubleshooting, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................3 2. SAFETY INSTRUCTIONS................5 3. CONTROL PANEL..................7 4. DAILY USE....................10 5.
- Page 4 • Children should be supervised to ensure that they do not play with the appliance. • Children shall not carry out cleaning and user maintenance of the appliance without supervision. • Keep all packaging away from children and dispose of it appropriately.
- Page 5 • When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. •...
- Page 6 mains cable, compressor). Contact the • Do not touch the compressor or the Authorised Service Centre or an condenser. They are hot. electrician to change the electrical • Do not remove or touch items from the components. freezer compartment if your hands are wet •...
- Page 7 2.6 Service 2.7 Disposal • To repair the appliance contact the WARNING! Authorised Service Centre. Use only original spare parts. Risk of injury or suffocation. • Please note that self-repair or non- • Disconnect the appliance from the mains professional repair can have safety supply.
- Page 8 The temperature indicators show the set temperature. The ECOMETER indicator shows the appliance's current energy consumption. Three fully lit bars indicate the most The set temperature will be reached energy-efficient setup. within 24 h. After a power failure, the appliance 3.5 Extra Cool function restores to the set temperature.
- Page 9 3.7 Fan function the appliance factory settings and to change the temperature units from °C to °F.: To switch on the function, press the Fan Activating the Setting mode button. The Fan indicator lights up. 1. Press and hold the ECO button for To switch off the function, press again the approx.
- Page 10 1. Activate the Setting mode. 1. Activate the Setting mode. 2. Tap until the display shows 2. Tap until the display shows . Tap the indicator showing the unit to . Tap until the display shows select between for Celsius and turns into blinking and then into for Fahrenheit.
- Page 11 2. Place the rear part of the drawer on the rails. 4. Pull the drawer out while lifting it up and detach it from the rails. 3. Keep the front of the drawer lifted up while pushing the drawer in. To reassemble: 1.
- Page 12 2. Push the rails cap and lift up the front of 3. Keep the front of the drawer lifted up the drawer. while pushing the drawer in. 3. Pull the drawer out while lifting it up and 4. Press the front part of the drawer detach it from the rails.
- Page 13 2. Pull the glass shelf support towards yourself. To remove the humidity control device, open the drawer below the glass shelf and pull out the cover. Condensation may occur in the GreenZone drawer. Remove it using a 4.6 Humidity control soft cloth.
- Page 14 When the freezing process is complete, the appliance automatically returns to the previous temperature setting (see "Extra Freeze function"). For more information refer to "Hints for freezing". 4.10 Storage of frozen food When activating the appliance for the first It is also possible to switch on the device time or after a period out of use, activate the manually when needed (refer to "Fan Extra Freeze function at least 3 h before...
- Page 15 • Do not cover the ventilation grilles or holes. Type of food Shelf life • Ensure that food products inside the (months) appliance allow air circulation through Seafood: holes in the rear interior of the appliance. Fatty fish (e.g. salmon, mackerel) 2 - 3 5.2 Hints for freezing Lean fish (e.g.
- Page 16 6. CARE AND CLEANING Regularly clean the defrost water drain hole WARNING! in the middle of the fridge compartment channel. Refer to Safety chapters. Use the tube cleaner provided with the 6.1 Cleaning the interior appliance. Before first use clean the interior and all accessories with lukewarm water and neutral soap, then dry.
- Page 17 Problem Possible cause Solution The mains plug is not connected to Connect the mains plug to the the mains socket correctly. mains socket correctly. There is no voltage in the mains Connect a different electrical appli‐ socket. ance to the mains socket. Contact a qualified electrician.
- Page 18 Problem Possible cause Solution Temperature set in the appliance is Set a higher temperature. Refer to too low and the ambient tempera‐ "Control panel" chapter. ture is too high. Water flows on the rear plate of the During the automatic defrosting This is correct.
- Page 19 Problem Possible cause Solution There is no cold air circulation in the Ensure cold air circulation in the ap‐ appliance. pliance. Refer to the "Hints and tips" chapter. The appliance is in the demo mode. Press and hold the Extra Cool and appears on the display.
- Page 20 10. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol . Put the the household waste. Return the product to packaging in relevant containers to recycle it. your local recycling facility or contact your Help protect the environment and human municipal office.
- Page 24 222381870-G-422024...
Need help?
Do you have a question about the ENG7TE75S and is the answer not in the manual?
Questions and answers