Dimms; System Board Components - Dell OPTI PLEX GX1 Service Manual

The following subsections contain procedures for removing/replacing system
board components (see Figures 1-12 and 1-13).
To remove a DIMM from one of the three DIMM sockets, follow these steps:
1. Remove the system power supply.
2. Locate the three DIMM sockets.
3. To remove a DIMM, push outward on the DIMM socket's securing clips
until the DIMM is released from its socket.
securing clips (2)
4. Lift the DIMM away from the socket.
5. Reinstall the replacement DIMM by pressing the DIMM fully into the
socket while closing the securing clips to lock the DIMM into the socket.
securing clips (2)
6. Replace all assemblies and cables previously removed.
Removing and Replacing Parts on the Mini Tower Chassis
2.
1.
2.
1.
6-21