Table of Contents
Advertisement
Time
Date
Diskette Drive A
Diskette Drive B
Drives:
Primary
Secondary
Reserved Memory
CPU Speed
Num Lock
Resets time on computer's internal clock.
Resets date on computer's internal calendar.
Identifies type of diskette drives installed.
Option choices always match physical loca-
tions of drives in computer. Tape drives are not
reflected in these options.
NOTE: For OptiPlex NX1 chassis, a single dis-
kette drive can be used for service purposes
only.
Identifies drives attached to the IDE1 and IDE2
connectors on system board. Each EIDE con-
nector supports two EIDE drives (Drive 0 and
Drive 1).
For EIDE hard-disk drives, the system provides
an automatic drive-type detect feature. To use
this feature, highlight the appropriate Drive
option and type a (for automatic ).
If none of the supported drive types matches
the parameters of the new drive, enter
parameters directly. To do so, highlight the
appropriate Drive option (Drive 0 or Drive 1)
and type u to display
highlight each of the parameter fields in suc-
cession, and enter the appropriate number for
each field.
NOTES: For EIDE devices such as EIDE
CD-ROM drives and EIDE tape drives that are
using the built-in EIDE controller, set the
appropriate Drive option to Auto.
NOTE: The OptiPlex NX1 chassis supports
only one hard-disk drive and no CD-ROM drive
or tape drive.
Designates a region of system board memory
that can be supplied by an expansion card.
This feature should not be enabled unless an
expansion card that requires special address-
ing is installed.
Indicates processor speed at which system
boots—the processor's rated speed or a
slower compatibility speed, which disables
cache.
Determines whether keyboard's Num Lock
mode is activated.
. Press
Tab
to
<
>
System Setup Program
A-3
Advertisement
Table of Contents
