Dell OPTI PLEX GX1 Service Manual page 120

6-2
1. Turn off the computer and any attached peripherals.
2. Disconnect the computer and any attached peripherals from their
power sources to reduce the potential for personal injury. Also, dis-
connect any telephone or telecommunication lines from the
computer.
3. Wait 5 seconds after powering down the computer before
disconnecting a peripheral from the computer or removing a compo-
nent from the computer's system board to avoid possible damage to
the system board.
Figure 6-1 shows an internal view of the interior of the mini tower computer
and identifies major components for orientation. Refer to this illustration, as
needed, when performing the component removal/replacement procedures in
this chapter.