Restore: Step 4; Syslog Server Screen - ZyXEL Communications NSA325 User Manual

11.10.4 Restore: Step 4

Use this screen to select the location in the NSA where you want to restore your backup.
Figure 144 Protect > Restore: Step 4
The following table describes the labels in this screen.
Table 73 Protect > Restore: Step 4
LABEL
Step 3. Set a restore target and start restoring
Browse
Previous
Done

11.11 Syslog Server Screen

Use this screen to configure the NSA to accept syslog logs from syslog clients such as ZyXEL's G-
4100 v2.
Note: You may need to configure any firewalls between the NSA and the syslog clients in
order to let the syslog traffic go to the NSA.
Media Server User's Guide
DESCRIPTION
Click this to select a folder where you want to place the restored files.
• Volume - Select a volume from the list.
• Current Location - This is the location of the selected folder.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Click Apply to save your settings and Cancel to close the screen.
Click this to go back to the previous screen.
Click this to run the restore process and go back to the Backup screen.
Chapter 11 Package Management
253