Installation And Configuration; Unpacking The System - Dell POWEREDGETM MVT01 Getting Started Manual

Installation and Configuration

CAUTION:
Before performing the following procedure, read and follow the safety instructions and important
regulatory information in your Product Information Guide.
This section describes the steps to set up your system for the first time.
CAUTION:
Installing the feet on a stand-alone tower system is necessary to provide a stable foundation for the
system. Failure to install the feet poses the risk of having the system tip over, possibly causing bodily injury or
damage to the system.
CAUTION:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the
system by yourself.

Unpacking the System

Unpack your system and identify each item.
Keep all shipping materials in case you need them later.
See the documentation included with your system on installing the system stabilizer feet.
6
Getting Started With Your System