ZyXEL Communications NBG4115 - V1.0 Manual page 87

Enter the following values for each service you want to add. For this tutorial, you
need to add each of the following service (see table below) and click Apply.
Table 28
FIELDS
Active
Direction
LAN IP
Range
Protocol
Port Range
Policy
Rate
Apply
After adding these services, go to Management > Bandwidth MGMT >
Advanced and check if you have the correct values.
Figure 44 Tutorial: Bandwidth Allocation Example
Note: The Policy column displays either Max (maximum) or Min (minimum). This is
directly directed to the value in the Rate column. For example, you selected
Min and entered 30M as the rate for the VoIP service. The NBG4115 allocates
at least 30 megabytes for the VoIP service.
Refer to Appedix F on page 275
the Bandwidth Mgnt screen.
NBG4115 User's Guide
REAL AUDIO RTSP
Check this to turn on this bandwidth management rule.
Select Both applies bandwidth management to traffic
that the NBG4115 forwards to both the LAN and the
WAN.
Enter 192.168.1.1 ~ 192.168.1.33.
TCP TCP or UDP
7070 554
Min
Select 30M as the minimum bandwidth allowed.
Click this to add the rule to the Bandwidth Allocation table.
for a list of common services that you can add in
SERVICES
VDO LIVE
TCP
7000
Chapter 7 Tutorials
FTP
Select To WAN
Enter
192.168.1.34
TCP
20 ~ 21
Max
Select 64K
87