10.3 IP
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 65 Network > LAN > IP
The following table describes the labels in this screen.
Table 45 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset
NBG4115 User's Guide
DESCRIPTION
Type the IP address of your NBG4115 in dotted decimal notation
192.168.1.1 (factory default).
The subnet mask specifies the network number portion of an IP
address. Your NBG4115 will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG4115.
Click Apply to save your changes back to the NBG4115.
Click Reset to begin configuring this screen afresh.
Chapter 10 LAN
127