ZyXEL Communications NBG4115 - V1.0 Manual page 79

In the wireless client utility, find the WPS settings. Enable WPS and press the WPS
3
button (Start or WPS button)
Log into NBG4115's Web Configurator and press the Push Button button in the
4
Network > Wireless Client > WPS Station screen.
Note: Your NBG4115 has a WPS button located on its panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The NBG4115 sends the proper configuration settings to the wireless client. This
may take up to two minutes. Then the wireless client is able to communicate with
the NBG4115 securely.
The following figure shows you an example to set up wireless network and security
by pressing a button on both NBG4115 and wireless client (the NWD210N in this
example).
Figure 33 Example WPS Process: PBC Method
Wireless Client
NBG4115 User's Guide
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
Chapter 7 Tutorials
ZyXEL Device
79