Ip Static Route Screen - ZyXEL Communications NBG-4615 User Manual

Chapter 21 Static Route

21.2 IP Static Route Screen

Click Network > Static Route to open the IP Static Route screen.
Figure 110 Network > Static Route
The following table describes the labels in this screen.
Table 69 Network > Static Route
LABEL
Static Routing Settings
Route Name
Destination IP
Address
IP Subnet
Netmask
Gateway IP
Address
Metric
Interface
Add Rule
Application Rules Summary
No.
Active
Name
Destination
Gateway
Metric
190
DESCRIPTION
Enter a the name that describes or identifies this route.
Enter the IP network address of the final destination.
This is the subnet to which the route's final destination belongs.
Enter the IP address of the gateway.
Assign a number to identify the route.
Select the interface through which the traffic is routed.
Click this to add the IP static route.
This is the number of an individual static route.
The rules are always on and this is indicated by the icon.
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
This is the number assigned to the route.
NBG4615 User's Guide