ZyXEL Communications NBG-4615 User Manual page 182

Chapter 19 NAT
The following table describes the labels in this screen.
Table 66 Network > NAT > Application
LABEL
Add Application Rule
Active
Service Name
Port
Server IP
Address
Application Rules Summary
#
Active
Name
Port
Server IP
Address
Modify
Apply
Cancel
182
DESCRIPTION
Select the check box to enable this rule and the requested service can
be forwarded to the host with a specified internal IP address.
Clear the checkbox to disallow forwarding of these ports to an inside
server without having to delete the entry.
Type a name (of up to 31 printable characters) to identify this rule in
the first field next to Service Name. Otherwise, select a predefined
service in the second field next to Service Name. The predefined
service name and port number(s) will display in the Service Name and
Port fields.
Enter the start and end port(s) to be forwarded.
Type the inside IP address of the server that receives packets from the
port(s) specified in the Port field.
This is the number of an individual port forwarding server entry.
This icon is turned on when the rule is enabled.
This field displays a name to identify this rule.
This field displays the port number(s).
This field displays the inside IP address of the server.
Click the Edit icon to display and modify an existing rule setting in the
fields under Add Application Rule.
Click the Remove icon to delete a rule.
Click Apply to save your changes back to the NBG4615.
Click Cancel to begin configuring this screen afresh.
NBG4615 User's Guide