Epever LFP2.56KWH25.6V-P65L2EV50 Manual

SolarV GmbH Am Kronberger Hang 2 (Halle 1), 65824, Schwalbach am Taunus
※ Thanks for selecting the EPEVER LiFePO4 battery; please read this
manual carefully before using the product.
※ Do not use the product in humid, salt spray, corrosion, greasy,
flammable, explosive, dust accumulative, or other severe environments.
※ Please reserve this manual for future review.
LiFePO (LFP) Battery
4
LFP2.56KWH25.6V-P65L2EV50
1. Important Safety Instructions
Work and storage precautions:
a) Please store the battery in a cool and dry place. Keep the battery
away from corrosive, explosive, and insulating gases or conductive
dust, as well as away from sources of fire, heat, and high voltage. It is
forbidden to immerse the battery in water and keep children out of
reach of the battery. No static electricity exists (static electricity can
easily damage the battery protection circuit and cause battery
damage).
b) Fix the battery securely in a reasonable environment, and connect the
connector reliably to avoid arcs and sparks caused by the contact
friction.
c) Handle the battery gently to avoid vibration, collision, and pressure
shock. Otherwise, it may cause battery short circuit, resulting in high
temperature and fire.
d) Do not short-circuit the battery, and do not disassemble the battery to
avoid danger.
e) Please keep the battery in a half-charge state (40%~80% SOC is
preferred). Please use non-conductive materials to wrap the battery to
avoid direct contact with metal, which may cause damage to the
battery.
f) Dispose of discarded batteries safely and not put them in fire or liquid.
Hazard warning:
a) It is strictly forbidden to crush, drop, collide, puncture, burn, or other
destructive acts on the battery.
b) Do not disassemble the battery. Improper disassembly may damage
the battery's protection function, causing battery deformation, heating,
smoking, or burning.
c) Do not short-circuit the battery. Connecting the battery's positive and
negative poles with conductive materials, storing and transporting the
battery together with conductive materials are prohibited.
d) Do not heat or burn batteries. Otherwise, it will cause the melting of
battery components, loss of safety functions, or electrolyte
combustion. Overheating can deform the battery, heat, smoke, or
burn.
Emergency treatments:
a) Avoid skin and eye contact with the electrolyte when it leaks. In case
of contact, immediately wash with plenty of water and seek help from
1
TEL:+49 (0) 61969076877
a doctor.
b) It is forbidden for any person or animal to swallow any part of the
battery or the substances contained in the battery.
2. Appearance
❶ Lithium battery negative terminal
3. Charging Operation
1. General Checking.
 Check thoroughly including all the cables for showing no damages.
 Make sure the mains supply complies with the specification of the
charger and the battery.
2. Turn off the charger and connect it to the battery.
WARNING: Check the battery polarity before connecting to the
charger. It is forbidden to reverse connect the battery.
3. Connect the charger to mains supply and turn on the charger.
Standard charge:

Charge to 24V with 20A (0.2C) constant current, and then charge to 0.05C
with 28.8V constant voltage cutoff.
Note: All tests stated in this document shall be performed at 25±2℃.
2
E-Mail: info@solarv.de www.solarv.de
❷
❶
❷ Lithium battery positive terminal