Starting Otist; Figure 55 G-570U In Wireless Client Mode: Otist Screen; Figure 56 Security Key - ZyXEL Communications G-570U User Manual

6.16.1.3.1 Wireless Client Mode: OTIST Button
If you use the OTIST button, the default (01234567) or previous saved (through the web
configurator) Setup key is used.
Double-click the OTIST button to automatically change the G-570U to wireless client mode
and start OTIST.
6.16.1.3.2 Wireless Client Mode: Web Configurator
Start the web configurator and click Wireless. Select Wireless Client in the Operation Mode
field.
Click on the OTIST tab. The screen displays as shown. Enter the same Setup Key as your
AP's. Click Start when you are ready to begin OTIST.

Figure 55 G-570U in Wireless Client Mode: OTIST Screen

6.16.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. After reviewing the settings, click OK.

Figure 56 Security Key

Chapter 6 Wireless Screens
ZyXEL G-570U User's Guide
89