Weight; Egress Set; Figure 137 Frame-Type Command Example; Figure 138 Weight Command Example - ZyXEL Communications Dimension ES-3148 User Manual

Figure 137 frame-type Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged

32.8.9 weight

Syntax:
where
<wt1> <wt2> ...
<wt8>
An example is shown next.
• Enable WFQ queuing on the switch.
• Enable port two and ports six to twelve for configuration.
• Set the queue weights from Q0 to Q7.

Figure 138 weight Command Example

ras# configure
ras(config)# wfq
ras(config)# interface port-channel 2,6-12
ras(config-interface)# weight 8 7 6 5 4 3 2 1

32.8.10 egress set

Syntax:
where
<port-list>
An example is shown next.
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
Chapter 32 Command Examples
weight <wt1> <wt2> ... <wt8>
Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from
egress set <port-list>
Sets the outgoing traffic port list for a port-based VLAN.
Dimension ES-3148 User's Guide
to .
wt 1 wt 8
239