Configuring Port Trunking; Figure 7-1 Trunking: Aggregator Setting; Table 7-1 Trunking: Aggregator Setting - ZyXEL Communications Dimension ES-2008 User Manual

Dimension ES-2008 Ethernet Switch
7.2

Configuring Port Trunking

Port trunking lets you group up to eight consecutive ports into a single dedicated
connection.
To configure port trunking, click Administrator, Trunking and the Aggregator Setting
tab.
Follow the instruction in the table next to change the settings.
FIELD
System Enter a number to identify and set the priority of an active Link Aggregate
Priority Control Protocol (LACP). The smaller the number, the higher the priority
level.
Group ID Select a trunk group ID from the drop-down list menu and click Select to
display the configured settings.
LACP Select Enable from the drop-down list box to set the trunk group as a
dynamic trunk group.
Select Disable to set the trunk group as a local trunk group.
7-2

Figure 7-1 Trunking: Aggregator Setting

Table 7-1 Trunking: Aggregator Setting

DESCRIPTION
Port Trunking