Related Manuals for Beliani NAMIB 35610
Summary of Contents for Beliani NAMIB 35610
- Page 1 FLOOR MOUNTED ELECTRIC FIREPLACE INSTALLATION & USER INSTRUCTIONS Model: NAMIB 35610 Importer: Beliani (International) GmbH Haldenstrasse 5, 6340 Baar, Switzerland...
-
Page 2: Table Of Contents
Warranty conditions Manufacturer and importer TECHNICAL PRODUCT DATA Item number 35610 Power supply 220-240V~50 Hz Power consumption 2000 W Model NAMIB 35610 Item Symbol Value Unit Heat output Types of heat input, for electric storage local space heaters only Nominal... -
Page 3: Safety Instructions
With adaptive start control With working time limit With black lamp sensor Contact details Beliani (International) GmbH Haldenstrasse 5, 6340 Baar, Switzerland SAFETY INSTRUCTIONS – Before use, check the voltage specifications on the rating plate and only connect the appliance –... -
Page 4: Package Contents
– Ensure that the mains cable does not come into contact with sharp edges or hot surfaces. – Do not cover the fireplace to avoid overheating. – Do not use the appliance with an external timer, a remote-controlled socket or any other device that is meant to automatically switch the fireplace on and off.. -
Page 5: Remote Control
1. Mantel 5. Heat button 2. Logs 6. Flame button 3. LED Flame 7. On/off switch 4. Remote control 8. Power switch REMOTE CONTROL Before using the remote control, press on the battery and slide it out of the compartment (on the back of the remote control). -
Page 6: Dimensions
If you are not sure whether the wall can support the appliance and/or what type of wall fixing you should use, you should seek advice from a professional and purchase the correct fixings. Alternatively, you can look for a more suitable wall location. Instructions for installation and use Do not build any part of the appliance into the wall and do not run the power cable under carpets. - Page 7 When lifting, always make sure to keep your back as straight as possible and bend your knees. Avoid lifting with the upper half of your body. Bend your knees and not your hips. Do not lean forward or sideways while carrying the appliance. Always hold the device securely with the palms of your hands.
-
Page 8: Operation
NOTE: Before installation, ensure that the floor and wall are level. Make sure that there are no cables or wires in the wall you want to drill into. If you have doubts about this, consult a specialist. If you are installing the appliance with a cavity behind it, suitable wall elements (not included) are required. - Page 9 NOTE: The set temperature must be higher than the room temperature for the heating function for work. Automatic control function To increase the temperature, press the + button on the remote control. To decrease the temperature, press the - button on the remote control. The temperature can be set between 15°C and 30°C.
-
Page 10: Cleaning And Maintenance
1. Press the + or - buttons to set the desired temperature (between 15 ℃ and 30℃). The default setting is 20 ℃. 2. Press the AUTO button and the Timer On/Off button to activate heating timer. Note: Try to repeat this if you want to set several time cycles Crank down If this function is activated, the device can be detected when the room temperature drops, for example with open windows or doors. -
Page 11: Notes On Disposal
The device is not switching on Ensure the main switch is on. Replace the fuse in the plug. Pebbles glow but flame effect does not work Check to see if the spinning motor is working. If not, contact specialists. Heater doesn't work, but Power and Heater Turn all switches / buttons to the "OFF"... - Page 12 It refers only to the respective sample submitted for conformity. Details can be found at: www.bureauveritas.com/cps Declaration of performance Unique product type identification code: :LJSF4016E Purpose: Hotel, Household Importer: Beliani (International) GmbH Haldenstrasse 5 6340 Baar Switzerland Phone +41 43 5082233 Signed on behalf of the importer and manufacturer by: Michael Widmer, Managing Director 9493 Maureen, 19.03.2024...
Need help?
Do you have a question about the NAMIB 35610 and is the answer not in the manual?
Questions and answers