Basic Operations - LENCO TFT-2402 User Manual

Make sure all necessary connections are correctly
connected before turn on the power.
The power indicator turns red and the unit is in the standby
mode.
Turn on the power
Press [z] to turn on the main unit.
The power indicator turns blue.
Turn off the power
Press [z] again can turn off the main unit.
The unit is automatically set standby mode.
The power indicator turns red.
Using the Sleep Timer
The sleep timer automatically switches off the power after a
preset time has elapsed. There are 9 time periods available,
press [SLEEP] on the remote control repeatedly to
select the desired sleep time:
0 Min v 15 Min v 30 Min v 45 Min
v60 Min v 75 Min v 90 Min v 105 Min v 120 Min
(The sleep timer starts when the setting is fi nished.)
To check the remain sleep time
Press [SLEEP] on the remote control, the remain sleep time
appears on the screen for a few seconds.
Select the TV channel
After selected "ATV" as input source, you can do either one
of followings to select your channel.
• Press [p CH] or [CH o] (or [-PROGRAM] or [PROGRAM+]
on the main unit).
CH
• Press [0, 1~9] to input the channel
number directly.
• Press [ ] to go back the previous
channel you've watched last time.
Selecting the picture mode
Press [P.STD ] repeatedly on the remote
control to select the desired picture mode.

BASIC OPERATIONS

Select the input source
Turn on the connected necessary external
device. Press [SOURCE] to select the
proper input source.
The input source menu appears.
1. Press [o/p] to move the high-lighted
bar to the desired source item.
2. Press [OK] ( or [b/a] )to confi rm.
Information of the selected source name appears on the TV
for a few seconds.
Information display
Press [INFO] on the remote control, the related
information of current source appears on the screen
automatically.
Adjusting the volume
Press [ - VOL] to reduce the volume.
Press [VOL+ ] to increase the volume.
NICAM Function
Press [I/II] on the remote control when input source is "TV".
This operation do no effect to the channels without NICAM
signal.
Once [I/II] is pressed, it alternates in the different sound
options such as mono, stereo, dual I, dual II.
Selecting the OSD language
The factory setting of OSD (On Screen Display) language is
"English". To edit the OSD.
1. Press [MENU], OSD menu appears.
2. Press [p] until "Function" menu appears.
3. Press [a] to enter the setting menu, and "Language" is
high-lighted.
4. Press [b/a] to set the language to your desired language.
5. Press [MENU] to exit the submenu.
Mute function
FAV FAV
Press [MUTE
MENU the sound temporarily.
Press this button again (or [VOL+]), the sound
comes back.
OK
Selecting the sound mode
ASPECT
Press [S.STD
select the desired sound mode.
MIX CANCEL SIZE HOLD
INDEX REVEAL SUBPAGE TTX
E8
VOL
] on the remote control to switch off
] repeatedly on the remote control to
TV
AV
S-VIDEO
SCART
HDMI
PC