Table of Contents
Advertisement
Basic Operation
Power on/off
1. Connect to the power with a power code, and turn on the switch.
2.-To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press SOURCE button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or
remote control to select the input source, press ENTER button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic buttons on the remote control
POWER: Turn the TV on/standby.
MUTE: Press to mute the sound, press again or press VOL+ to unmute.
PICTURE : Press repeatedly to cycle through the available video picture modes.
SOUND: Press to cycle through the different sound settings.
NICAM/A2: TV Nicam/A2 select.
Number Buttons: Choose channel directly.
Press number buttons and press ENTER button to play the channel.
: Return to the previous channel viewed.
DISPLAY: Display the information of the current mode.
SYS-MENU: Press to display the OSD menu.
SYS-EXIT : Press to exit the OSD menu.
ASPECT: Press to change the screen display mode.
Thumbstick(
settings to your preference.
ENTER: CONFIRM button.
Timer: Shutdown timer.
SOURCE : Press to display the input source menu.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
Basic Operation
): Allows you to navigate the on-screen menus and adjust the system
/
button on
9
Main:
TV
AV
DVD
S-Video
SCART 1
SCART 2
YPbPr
HDMI1
HDMI2
VGA
Advertisement
Table of Contents
