Osd Basic Adjustment - LENCO DVT-227 User Manual

PICTURE
You can select the type of picture, which best corresponds to your viewing.
1. Press the "MENU" button to enter the
OSD menu. Then press " / " button
to select the "PICTURE" menu. Enter
the "PICTURE" menu by pressing
" " button.
2. Press " / " button to select
"PICTURE MODE" and press the
" / " button to select the picture
mode .
3. Press " / " button to select "BRIGHTNESS" and press the " / " button to enter brightness
adjustment menu to adjust brightness.
4. Press " / " button to select "CONTRAST" and press the " / " button to enter contrast
adjustment menu to adjust contrast.
5. Press " / " button to select "SATURATION" and press the " / " button to enter color
adjustment menu to adjust saturation.
6. Press " / " button to select "SHARPNESS" and press the " / " button to enter sharpness
adjustment menu to adjust sharpness.
7. Press " / " button to select "HUE" and press the " / " button to enter hue adjustment
menu to adjust hue.
Note: The item hue is only for NTSC
8. Press " / " button to select "COLOUR TEMP" menu and press the " / " button
the color temp.
SOUND
You can select the type of sound, which best
corresponds to your listening.
1. Press the "MENU" button to enter the
OSD menu. Then press " / " button to
select the "SOUND" menu. Enter the
"SOUND" menu by pressing " " button .
2. Press " / " button to select "SOUND
MODE" and press the " / " button
select the sound mode.
3. Press " / " button to select "BASS" and press the " / " button to enter bass adjustment
menu to adjust bass.

OSD basic adjustment

to
10
to select