Listening To The Radio - LENCO NXT-01 Owner's Manual

Hide thumbs Also See for NXT-01:

Table of Contents

LISTENING TO THE RADIO

1.) Press the STANDBY/ON button on the top panel or on the remote control. The

main display turns on.

Press the FUNCTION button repeatedly on the top

panel or on the remote control to switch between

various modes.

Note: The looping order of the FUNCTION button is: TUNER

CARD-USB.

The display will show an MW or FM station frequency.

To select a different band (MW or FM), press the

STOP/BAND button on the top panel or on the

remote control.

Note: In FM station with Stereo support, you can

press ST/MO/FIND button to select between

Stereo or Mono sound. If the reception is noisy or

weak, press the button ST/MO/FIND to the mono

setting. The STEREO indicator will disappear. The reception will normally

improve although the sound will no longer be in stereo.

2.) Tune to the desired frequency as follows:

Manual Tuning

Repeatedly press the SKIP/TUNE

remote control until the frequency of the desired station appears on the

display.

Automatic Tuning

Press and hold the SKIP/TUNE

remote control until the display begins to move, and then release the buttons.

The tuner will search up or down the frequency for the next strong station and

stop on that station. Repeat this procedure until the tuner stops on your

desired station.

buttons on the top panel or on the

- 15 -

AUX

Table of Contents