Table of Contents
Advertisement
Connecting the LCD Screen to the Player
The power for the screens is provided by the DVD player through the provided cables which also provide the audio/video signal from
the player to the screen. Follow these steps to make the connection.
1. Connect one end of the Power/AV cable (mini DIN) to the OUT on the Player and the other end to the DC. AV INPUT on the 2nd screen.
2. Care must be taken to make sure that the arrow mark (
Player.
Do not force in when making the connection, or you may risk damaging the pins on the connectors.
Warning!
1. Do not turn on the DVD player power until the connection of Power/AV cable between the Player and the screen is done.
2. Always turn off the DVD player power before disconnecting the Power/AV cable between the Player and the screen.
3. Connect the screen to the player using only the cable provided in this product, or you may risk damaging or causing fire if other cable
is used.
5 6
) on the connector of the cable aligns with the arrow mark (
DVD Player
POWER
VOL
ON
OFF
POWER
VOL
OFF
ON
Power/AV Cable(provided)
~ 8 ~
LCD Screen
A V INPUT
DC 1 2V
0. 5 A
) on the
Advertisement
Table of Contents
