Download Print this page

LENCO NR-001 Instruction Manual page 2

Plastic retro radio

Advertisement

AC POWER OUTLET
ANTENNA
Power supply
Plug the radio power cord on the back of the radio into any regular AC
outlet. Never connect to a DC electrical outlet or to any other Voltage and
cycles.
Radio operation
To turn the radio on:
Turn the volume knob clockwise.
Adjust the volume control to the desired volume level
Turn the tuning knob until the dual pointer sets to the station of your choice
Antenna
Unwind the throw-up antenna for FM reception and place it in the position which permits
best reception
Instruction manual shall contain following texts
a) The power switch in this unit is located on the secondary circuitry and does not
disconnect the whole unit from the mains in off position
b) This unit must not be exposed to moisture of rain

Advertisement

loading