Advertisement
RECORDING FROM THE RADIO
1. Load a cassette tape into the tape deck and close the door.
2. Tune in to desired station by rotating the TUNING KNOB.
3. Depress RECORD key to begin recording. RECORD key and PLAY key are engaged simultaneously.
4. Press STOP/EJ. key to end recording.
5. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A
CASSETTE TAPE.
NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ. key to
momentarily interrupt recording gives you a much clear recording.
RADIO RECORDING TIPS
To temporarily pause the recording, press PAUSE key on the cassette deck. Press PAUSE key again to resume
recording.
RECORDING FROM CD/MP3
1. Insert a blank cassette tape into the tape deck.
2. Rotate the FUNCTION switch to CD/MP3 position.
3. Load a disc and select the desired track you want to record.
4. Press CD PLAY/PAUSE button to start CD playback. Press RECORD key and the PLAY key will
automatically engage to begin recording.
5. Press PAUSE key to interrupt or edit recording. Press it again to resume recording.
6. Press STOP/EJ. key to end recording.
7. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A
CASSETTE TAPE.
AUTOMATIC LEVEL CONTROL (ALC)
This unit has the latest circuitry-Auto Level Control (ALC), While recording, adjusting the VOLUME control will
not affect the recording volume, it keeps in a right and flat volume.
USING THE CD/MP3
LOADING A DISC
1. Set the FUNCTION switch to CD/MP3 position.
2. Open the CD door.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door.
The total number of tracks will appear in the display after 5 seconds.
5. To remove the CD, press OPEN to open CD compartment lid, grasp the CD by its edges, and carefully take it
out.
Note:
To ensure good system performance; wait until the disc tray completely reads the disc before proceeding.
If no disc loaded into the compartment, or the disc is unreadable, the display will show nod.
PLAYING A DISC
1. Press PLAY/PAUSE button to start playback.
The playback starts from track 1, PLAY appears in the display.
To interrupt playback, press PLAY/PAUSE button.
PLAY flashes on and off in the display.
To resume playback, press PLAY/PAUSE button again, PLAY become steady on the display.
2. To stop playback, press STOP button, The total number of tracks appears in the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press SKIP FORWARD(NEXT)/BACKWARD button repeatedly in stop mode or during playing until the
desired track appears on the display.
Press PLAY/PAUSE button to start play.
5
Advertisement
