Advertisement
POWER SOURCE
This unit is designed to be operated on AC.
Plug the power cord into standard household AC wall outlet. For dual voltage version, make sure that the AC
VOLTAGE SELECTOR is switched to your local voltage(optional).
BASIC FUNCTION
SWITCHING ON THE UNIT
Note: Before switching on the unit, Please make sure that all connections have been got ready.
Press the POWER ON-OFF button, the large LCD display will illuminate. Rotating the FUNCTION SWITCH to
RADIO or CD to enter operating.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL clockwise or anticlockwise to increase or decrease volume.
HEADPHONES
For private listening, plug the headphones/earphones (not included) into PHONES jack(3.5 mm diameter).
CAUTION: Long time listening with headphones/earphones at high volume may cause harmful
damage to users ears.
USING THE RADIO
TUNING IN RADIO STATIONS
1. Move the FUNCTION switch to RADIO position.
2. Slide the BAND switch to select the desired wave band: AM, FM, FM ST..
3. Tune to required station by rotating the TUNING KNOB.
4. Adjust VOLUME CONTROL to desired volume level.
5. Extend ANTENNA WIRE to its full length if you are listening to FM broadcasting. Gently rock the unit back
and forth to get the best reception when you are listening to AM programme, or place the unit in an open
location.
Note: The FM STEREO indicator will be on when you are receiving FM stereo programme.
6. Turn off the radio by switching the FUNCTION switch to "TAPE" position, or press POWER ON/OFF to
switch off the unit.
USING THE CASSETTE
UNDERSTANDING THE BUTTONS
RECORD - Press to record from the radio or CD player.
PLAY - Press to play cassettes.
REWIND - From stop mode, press to rewind the tape toward the beginning.
F.FWD - From stop mode, press to advance the tape toward the end.
STOP/EJ. - Press to stop current tape activity or to open the cassette compartment door when no
buttons are active.
PAUSE - Press to interrupt tape play or record mode. Press the second time to resume tape play or tape
record mode.
PLAYING A CASSETTE TAPE
1. Rotate the FUNCTION switch to TAPE position.
2. Press STOP/EJ. key to open the cassette compartment door.
3. Insert cassette tape into the compartment with the open edge facing down and the full reel on the left.
4. Close the door securely.
5. Press REWIND or F.FWD to move tape to the desired starting point.
6. Press PLAY key to begin playing the tape.
7. Adjust the volume to your desired listening level.
AUTOMATIC STOP FEATURE
When the cassette deck is operating in play or record mode and the end of the tape is reached, the unit
automatically shuts itself off and returns all buttons to the off position.
4
Advertisement
