LENCO DVT-220 User Manual page 14

e. Press " / " button to select the channel in the list, press "ENTER" button to enter the
rename channel's window.
Input channel name at "____", press
" / / " button to select "letter",
"number", "_", "〔", "〕", "EMPTY" or
"BAK SPC", and press "ENTER" button
to confirm.
Press " / / " button to select "OK"
to save and return to the previous menu.
Press " / / "
"CANCEL" to exit and return to the
previous menu.
PC
1. Press the "MENU" button to enter the
OSD menu. Then press " / " button to
select the "PC" menu. Enter the "PC"
menu by pressing " " button.
2. Press " / " button to select
"H POSITION" menu and press the
" / " button to enter "H Position"
adjustment menu to adjust "H Position".
3. Press " / " button to select "V POSITION" and press the " / " button to enter
"V Position " adjustment menu to adjust "V Position".
4. Press " / " button to select "PHASE" and press the " / " button to enter Phase adjustment
menu to adjust phase.
5. Press " / " button to select "CLOCK" and press the " / " button to enter clock adjustment
menu to adjust clock.
6. Press " / " button to select "AUTO ADJUST" menu and press the "ENTER" button to do
auto adjustment.
DTV
1. Press the "MENU" button to enter the
OSD menu. Then press " / " button to
select the "DTV" menu when the current
signal source is in DTV. Enter the "DTV"
menu by pressing " " button.
2. Press " / " button to select "AREA"
menu and press the " / " button to select
the local country.
button to select
13