8.5" wide 16:9 tft lcd monitor slot in disc dvd/divx player built-in dvb-t tuner built-in tv tuner usb and 3 in 1 card reader full remote controller (39 pages)
CONTENT 1. PRECAUTIONS……………………………………………………………01 2. CAUTIONS ON USING THIS PLAYER………………………………….02 3. CHECKING ACCESSORIES……………………………………….………….03 4. SPECIFICATION……………………………………………………………..04 5. PARTS NAME AND FUNCTIONS………………………………………..04 5.1 PARTS ON THE FRONT OF THE PLAYER............04 5.2 PARTS ON THE BACK OF THE PLAYER...............05 5.3 PARTS ON THE TOP OF THE PLAYER……………………………………………….05 5.4 PART ON THE RIGHT SIDE OF THE PLAYER............06 5.5 TOUCH KEY IN THE FRONT OF THE PLAYER.............07 5.6 REMOTE CONTROL UNIT.................08...
Page 3
9.9 REPEAT PLAYING THE DISC................17 9.10 SEARCHING THE DISC..................17 9.11 ZOOM PLAYING....................17 9.12 PROGRAM PLAYING....................18 9.13 USING OSD......................19 9.14 SELECTING A SUB-TITLE..................19 9.15 SELECTING AN AUDIO..................19 9.16 SELECTING AN ANGLE..................19 9.17 PLAYING MP3 AND JPEG DISC................19 9.18 PLAYBACK THE FILES STORED ON A USB STORAGE DEVICE………………19 9.19 PLAYING THE FILE STORING IN A MEMORY CARD……………………………..20 10.
1. PRECAUTIONS Thank you for purchasing the player. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
2. CAUTIONS ON USING THIS PLAYER Do not move the player during playback During playback, the disc spins at high speed, so do not lift or move the player. Doing so may damage the disc. Transporting the player When transporting the player be sure to remove the disc and turn off the power, then unplug the power cord.
When carrying on planes Heed the airline company's rules. When carrying in hospitals Heed the hospital's rules When using with car power cable in cars Please turn on the engine and then connect with the car power cable for using. Cleaning the player Normally clean the player using a soft, dry cloth.
4. ALARM key press this to set alarm on or off 5.SLEEP key press this to set TFT sleep time (OFF,10minutes, 20minutes,30minutes, one hour, one and half hours, two hours) 6. LCD display when connecting AC-DC adapter or battery, the LCD display is lit 7.
1) Moving cursor right 2) Press these buttons to adjust LCD mode when in LCD mode Moving cursor down 1) Moving cursor left 2) Press these buttons to adjust LCD mode when in LCD mode 5. ENTER Confirm settings 6. SETUP Set the system information when the unit is in DVD mode.
1. Audio/video output Output audio/video signal 2. Audio/video input Input audio/video signal 3. USB (1.1) socket connecting to USB storage 4. Memory card socket Only for SD, MMC or MS card 5. Connecting to the AC-DC adapter 5.5 Touch Keys on the front of the player 1.
3) Press this for 1.5 second to scan automatically in RADIO mode. 7. + 1) Increasing the volume 2) Adjust time in TIME or ALARM settings mode. 8. – 1) Decreasing the volume 2) Adjust time in TIME or ALARM settings mode. Remote control unit 1.
Page 12
Moving cursor Up / Radio Channel addition. Moving cursor Right Moving cursor down/ Radio channel subtract 7. Setup Set up menu when the unit is in DVD mode 8. Enter to confirm settings Return to menu Press this to fast backward play during play mode Press this to fast forward play during play mode Press this to play or pause 13.
6. USING REMOTE CONTROL UNIT 6.1 Precautions before using remote control unit 1) Please pull out the PVC when the remote control unit is used for the first time 2) Don't drop or step on the remote control unit or subject it to shocks 3) Note that it may not be possible to operate the main unit if there are obstacles between it and the remote sensor 4) Don't expose the remote sensor to strong light.
Remove the old battery, then insert the new battery into the battery holder with the + side facing upwards. Fit the battery holder back to its place. Note: To prevent leakage of fluid from the lithium battery, remove the battery when not using the remote control unit for long periods of time (one month or more).
(1) Push A of the battery cover (back of the player) according to the direction; (2) Place the battery into the battery slot, make sure that + side of the battery is connected to the battery slot correctly ; (3) Put back the battery cover. Note: To prevent leakage of fluid from the battery, Please use rechargeable Ni_MH D size 1.2V/5000mAh (up) battery only.
To listen to audio, use V+/V-(remote controller) or +/- (touch key) to adjust the volume to a comfortable level. Note: Please do not use DTS discs. Strong noise is produced when DTS discs are played. Note: Insert the earphones plug securely. No sound will be heard unless the earphones are securely connected.
8.5 Connecting to a TV set Before connecting Turn off the power of the player and the devices to be connected. 8.6 Connecting to a digital amplifier that is not Dolby Digital / DTS /...
MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Dolby/DTS/MPEG compatible. Note: 1) Carefully check the player’s digital output settings before connecting the player to an amplifier which is not Dolby Digital / DTS / MPEG compatible. 2) Do not play DVDs when the audio settings are not correct.
Note: Please set the main unit to AV input mode. 9. BASIC OPERATIONS 9.1 Turning on/off the main unit 1) Turn power on (1) The main unit is in standby mode when the unit is powered (2) Press POWER (remote control unit or the main unit 1.5 seconds) to turn on the unit when the unit is powered.
9.4 Removing discs 1) Press STOP to stop playback 2) Open the TFT cover 3) Take out the disc 4) Close the TFT cover 9.5 Mode settings (Brightness/Contrast/Color/TFT display mode ) Please press MODE (remote control or in the main unit) to select an item you want to adjust/change when the main unit is in play mode.
9.9 Repeat playing the disc 1) A-B play mode (1) Press A-B, the TFT will show Repeat A- (2) Press A-B again, the main unit will repeat the play from A to B. (3) Press A-B again, the unit will resume normal playing. 2) Repeat playing the title, chapter or track (1) Press REPEAT to select the title, chapter or track when the unit is in play mode (2) DVD: title, chapter;...
Hint: (1) T is for Title, C is for Chapter (DVD discs). (2) T for track (CD, VCD discs) NOTE: There is no title, chapter or track for some discs. 2) Use the digits and cursor to select the list what you want. See the picture. 3) Use the cursor key to move the cursor to the PLAY icon, and press ENTER to start to play the list 4) Use the cursor key to move the cursor to the CLEAR icon, and press ENTER to...
mode. 2) Press OSD again to disable the information display. 9.14 Selecting a sub-title Press SUBTITLE to select the sub-title when the main unit is in play mode. 9.15 Selecting audio 1) Press AUDIO to select the audio language when the main unit is in play mode for DVD discs 2) Press AUDIO to select the audio channel when the main unit is in play mode for VCD, CD discs.
Page 24
the unit finished the reading. 3) Operation is like playing MP3 or JPEG files 4) Please remove the USB storage device directly when not using the USB storage device The MP3, JPEG, MPEG4 file can be play in this unit The MP3, JPEG, MPEG4 file can be play in this unit The MP3, JPEG, MPEG4 file can be play in this unit The MP3, JPEG, MPEG4 file can be play in this unit...
10. MAIN UNIT SETTINGS Press SETUP when the main unit is in play mode. The set up menu will be displayed in LCD. 10.1 Selecting a TV system Please select the proper video signal system if you want to see on a TV set. 1) NTSC: Please select this item when TV set is NTSC system TV set 2) PAL: Please select this item when TV set is PAL system TV set 3) Default: NTSC...
Picture scale is depending on the disc. 10.4 Setting parent lock 1) Default setting: 0000 2) When unlocked, a new parent lock can be entered, the parent lock level can be set 10.5 Setting parent lock level 1) This setting can control the unit to playback parent lock DVD discs. 2) Rating is divided into 8 levels, Selecting ADULT, the lock is cancel 3) Default: ADULT Note:...
10.7 Selecting the OSD language Please enter the OSD language select menu, use the cursor key to move the cursor to the language you want and press ENTER. 10.8 Selecting the audio language Please enter the audio language select menu, use the cursor key to move the cursor to language you want and press ENTER 10.9 Selecting the sub-title language Please enter the sub-title language select menu, use the cursor key to move the cursor to...
the language you want and press ENTER Note: 1) The language will be the disc default language if the language you want is not visible 2) Default language: English 11. RADIO MODE Please press mode (in the main unit) or Radio (in the remote controller) to select RADIO mode .