Download
Share
Print this page
VEVOR FF-Q903 Manual
  1. Manuals
  2. Brands
  3. VEVOR Manuals
  4. Tank Equipment
  5. FF-Q903
  6. Manual
VEVOR FF-Q903 Manual

VEVOR FF-Q903 Manual

Abrasive blaster tank
Hide thumbs

Advertisement

Quick Links

Download this manual
Technical Support and E-Warranty Certificate www. vevor. com/support
ABRASIVE BLASTER TANK
MODEL: FF-Q903
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

loading
Need help?

Need help?

Do you have a question about the FF-Q903 and is the answer not in the manual?

Questions and answers

Related Manuals for VEVOR FF-Q903

Summary of Contents for VEVOR FF-Q903

  • Page 1 Technical Support and E-Warranty Certificate www. vevor. com/support ABRASIVE BLASTER TANK MODEL: FF-Q903 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again...
  • Page 3 Warning-To reduce the risk of injury, user must read instructions manual carefully. Always wear ANSl approved safety goggles when working with tools and equipment. Wear eye protection. Wear ear protection. Wear protective gloves. Compliance is a EC & UK security certification. Safety Warnings and Precautions Thank you for using this product.
  • Page 4 5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended.
  • Page 5 15. Never use the machine around flammable materials. 16. Do NOT immerse the appliance in water or any other liquid. 17. This product cannot be used for other purposes. Not suitable for commercial INDOOR USE ONLY. use. 18. Do not use alcohol, gasoline, etc. as coolant. 19.
  • Page 6 ● Lead from lead based paints ● Crystalline silica from bricks,cement and other masonry products Arsenic and chromium from chemically-treated lumber Your risk from these exposures varies,depending on how often you do this type of work. To reduce your exposure to these chemicals:Work in a ventilated area,and work with approved safety equipment,such as those dust masks that are specially designed to filter out microscopic particles.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using tools such as your air compressor, whether powered by electric motor or gasoline engine, basic safety precautions should always be followed to reduce the risk of fire, electric shock,and personal injury. You should review the safety instructions for your air compressor before beginning abrasive blasting with this tool.
  • Page 8 PARTS LIST...
  • Page 9 PARTS LIST PART DESCRIPTION PART DESCRIPTION WATER TRAP TANK FILTER BRASS AIR WHEELS SUPPLY VALVE,3/8” BRASS COTTER PINS THROTTING VALVE,3/8” BRASS ABRASIVE FOOT METERING VALVE,3/8" MALE-FEMALE AXLE CONNECTOR NIPPLE HANDEBARS CONNECTOR HANDLE GRIPS AIR HOSE ABRASIVE PNA SCREW OUTLET PIPE HEX NUT CLAMP WASHER...
  • Page 10 CERAMIC FILLER CAP NOZZLE JONIT PIPE FRONT NUT INTAKE WASHER MANIFOLD DEADMAN PRESSURE VALVE GAUGE ADAPTOR NIPPLE CONNECTOR NOZZLES: A=9/64”D=3/32” B=1/8” C=7/64” INSTALLATION NOTES 1. Please dispose of all plastic bags carefully and keep them away from children and pets. 2.
  • Page 11 nipple connector(17) is screwed into each side of the filter.On one side,attach the air supply valve(19), to the nipple connector(17), and then attach the male/female connector (20), to the other side of the air supply valve. When you're ready to operate the abrasive blaster,the air hose from the compressor will fasten to the male/female connector (20).
  • Page 12 5. Refer to the drawing for step 5, assembly of the nozzle DEADMAN valve (34). In this assembly process, you'll select one of the four nozzles (28). This is not a permanent selection, as you may change nozzles according to the job being done. Screw the adapter (26), into the nozzle DEADMAN valve (34).
  • Page 13 WARNING! Disconnecting hose while Unit is under pressure could cause serious injury or death.Use safety lock pins and safety cables in all coupling connections to help prevent hose couplings from accidental disconnection. If twist-on type air hose couplings are used,they must be secured by safety lock pins or wires to prevent accidental disconnection while under pressure.
  • Page 14 nose and eyes be covered with appropriate safety protection at all times. 1. Do not place fingers, any body parts or any components in the filler plug seal area when the blast machine is being pressurized. Failure to keep body parts from the filler plug area will result in serious injury.
  • Page 15 components could result in exposing the operator or bystanders to high speed media and compressed air,causing serious injury. 10. Do not use corrosive materials of any type in unit. Use only clean, dry media. 11. Do not splice abrasive hose.The splice will wear out quickly and may violently spray media over the surrounding area.
  • Page 16 19. MAINTAIN CORRECT AIR PRESSURE,maximum of 110PSl is recommended, pressure must not exceed 125PSI. If pressure exceeds 125PSI,stop all work immediately,and disconnect the air compressor to reduce the excess pressure.Do not investigate the blaster's pressure problem until the pressure gauge,reads zero. OPERATING INSTRUCTIONS OPERATINGTECHNIQUE: 1.
  • Page 17 Disconnecting hose while Unit is under pressure could cause serious injury or death.Use safety lock pins and safety cables in all coupling connections to help prevent hose couplings from accidental disconnection. If twist-on type air hose couplings are used, they must be secured by safety lock pins or wires to prevent accidental disconnection while under pressure.
  • Page 18 enough into the tank to do the job at hand. But if this is a big job, fill the tank only 3/4 full, and reload as needed to finish the work. TIPS: if the humidity is 90/100%, the water trap (18) won't be able to trap all of the moisture in a 3/4 tank.Better to reduce the amount of abrasive,load more frequently, and empty the water trap more open.This will reduce the possibility of clogging the bottom of the tank or the line.
  • Page 19 ABRASIVE (MEDIA) USAGE 1. If moisture is in the media it will eventually damage the blaster tank or plug the system.Keep the media and compressor air dry to avoid this problem. 2. If media is moist, screen it and dry it before using. 3.
  • Page 20 Aluminum Oxide Aluminum Oxide is a high quality abrasive that is sharper than sand (not recommended) and cuts twice as fast as sand. It leaves a smooth textured finish with no pits. Aluminum Oxide is rougher than glass bead and can be used over and over again.
  • Page 21 Humid weather: Moderate humidity Keep media as dry as possible Moderate humidity Use drier or moisture separator High humidity Avoid that period of use if possible Overtaxed compressor: Compressor too small Restrict time used Nozzle size too large Use smaller size Too many leaks in plumbing Seal and tighten plumbing Holes in abrasive hose...
  • Page 22 ● Disconnect power supply. ● Lockout and tag out the compressed air supply. ● Bleed the air supply line to the blast gun. Immediate replacement of worn components is required.Failure to replace worn components could expose the operator or bystanders to high speed media and compressed air could cause death or serious injury.
  • Page 23 and the ceramic nozzles (28). 3. If air leaks develop in any of these parts, you should stop all work ,and find 3.what needs to be repaired or replaced. When it's new, the abrasive hose (25) has 2 cord piles and the walls are 1/4" thick. As the interior diameter is abraded, this wall becomes thinner and thinner.
  • Page 24 Technical Support and E-Warranty Certificate www. vevor. com/support...