Page 1
MULTI MULTI OUTDOOR UNIT INSTALLATION MANUAL Multi-Zone Heat Pump Systems 1.5 to 5 Tons Dual and Tri-Zone Quad-Zone Eight-Zone Multi F Multi F Multi F MAX...
Page 27
Selecting Field-Supplied Copper Tubing Type ACR copper is the only approved refrigerant pipe material for use with LG Multi F air conditioning products. ACR rated tubing is the only type that ships with yellow caps. Approved tubing for use with Multi F products will be marked “R410 RATED” along the length of the tube.
Page 32
Field-Provided Isolation Ball Valves LG maintains a neutral position on using isolation valves in VRF refrigerant piping systems. LG does not endorse any manufacturer of isola- tion valves. It is recognized that installing isolation valves may simplify future maintenance requirements, and, if used, considerations should be taken including, but not limited to, the following: •...
Page 58
3. Provide strain relief by securing the wiring / cable to the indoor unit with the factory-supplied clamps. 4. For more installation information for specific indoor units, refer to the separate indoor unit installation manuals on www.lg-dfs.com. Distributor (BD) Unit (Multi F MAX Systems Only)
Page 59
PI485 ance may differ depending on PI485 V-net Control Integration Board for Outdoor Units adapt Multi F, Multi F MAX systems to a LG VRF model). system central protocol for integration with LG central controllers. The PI485 is installed in the Multi F / Multi F MAX outdoor unit.
Page 68
LG SIMS The SIMs WLAN module and the smart phone app together provide monitoring and trouble- shooting capability for LG Multi F / Multi F MAX systems. SIMs functions only with LG Duct Free products. SIMs can display and graph operational data for the air conditioner system including the indoor unit and the outdoor unit.
Page 75
Power wiring to the indoor units and branch distribution unit(s) (Multi F MAX only) was installed per all local electrical code requirements. LG-supplied cable was used between each indoor unit and its zone controller. No cables were spliced and no wire caps are present.
Page 80
20001747 ISO 9001: 2008 LG ELECTRONICS INC. Refer to Service Manuals posted on www.lghvac.com for a full description of all error codes and work-arounds. LG Electronics Products Support 1-888-865-3026 USA LG Electronics, U.S.A., Inc. Follow the prompts for HVAC products.
Page 81
MULTI MULTI STANDARD WALL-MOUNTED INDOOR UNIT INSTALLATION MANUAL Models: LMN079HVT 7 kBtu LSN090HSV5 9 kBtu LSN120HSV5 12 kBtu LMN159HVT 15 kBtu LSN180HSV5 18 kBtu LMN249HVT 24 kBtu...
Page 108
MULTI Flaring Procedure One of the main causes of refrigerant leaks is a defective connection. For LG HVAC systems, the installer needs to know how perform flared connections successfully. • During installation, it is imperative to keep the piping system free of contaminants and debris such as copper burrs, slag, or carbon dust.
Page 118
Ensure all refrigerant piping is insulated. Exposed refrigerant piping will cause burns if touched. Wrap all refrigerant and condensate piping including field-provided isolation ball valves and flexible pipe connection kits provided by LG. All pipes must be insulated and each pipe must be separately wrapped. Any exposed piping will generate condensate or will cause burns if touched.
Page 124
• If using the LG Controller / Extension cable and the length needs to be further extended, the LG Extension Kit (sold separately) must be used. A maximum of four (4) kits (up to 165 feet) can be used.
Page 134
(4) to five (5) feet above the finished floor. • It could be necessary to use a handy box that is sized in metric units, depending on the sensor model. Check with your LG representative to verify which size of handy box is needed for the sensor in question.
Page 143
Who to call for assistance Freight Damage and Unit Replacements Your LG Manufacturer Representative Missing Parts Your LG Manufacturer Representative Freight Damage and Unit Replacements Your LG Manufacturer Representative Received Wrong Indoor Unit Model Your LG Manufacturer Representative Installation, Startup, and Commissioning Technical Assistance 1-888-865-3026 For warranty information, visit www.lghvac.com.
Page 144
20001747 ISO 9001: 2008 LG ELECTRONICS INC. LG Customer Information Center, Commercial Products 1-888-865-3026 USA LG Electronics, U.S.A., Inc. Follow the prompts for commercial A/C products and parts. Air Conditioning Technologies 4300 North Point Parkway IM_MultiF_StdWallMount_9HVT_HSV5_11_18 Alpharetta, Georgia 30022 Supersedes: IM_MultiF_StdWallMount_11_15 www.lghvac.com...
Page 145
MULTI MULTI STANDARD WALL-MOUNTED INDOOR UNIT INSTALLATION MANUAL Models: LMN079HVT 7 kBtu LSN090HSV5 9 kBtu LSN120HSV5 12 kBtu LMN159HVT 15 kBtu LSN180HSV5 18 kBtu LMN249HVT 24 kBtu...
Page 172
MULTI Flaring Procedure One of the main causes of refrigerant leaks is a defective connection. For LG HVAC systems, the installer needs to know how perform flared connections successfully. • During installation, it is imperative to keep the piping system free of contaminants and debris such as copper burrs, slag, or carbon dust.
Page 182
Ensure all refrigerant piping is insulated. Exposed refrigerant piping will cause burns if touched. Wrap all refrigerant and condensate piping including field-provided isolation ball valves and flexible pipe connection kits provided by LG. All pipes must be insulated and each pipe must be separately wrapped. Any exposed piping will generate condensate or will cause burns if touched.
Page 188
• If using the LG Controller / Extension cable and the length needs to be further extended, the LG Extension Kit (sold separately) must be used. A maximum of four (4) kits (up to 165 feet) can be used.
Page 198
(4) to five (5) feet above the finished floor. • It could be necessary to use a handy box that is sized in metric units, depending on the sensor model. Check with your LG representative to verify which size of handy box is needed for the sensor in question.
Page 207
Who to call for assistance Freight Damage and Unit Replacements Your LG Manufacturer Representative Missing Parts Your LG Manufacturer Representative Freight Damage and Unit Replacements Your LG Manufacturer Representative Received Wrong Indoor Unit Model Your LG Manufacturer Representative Installation, Startup, and Commissioning Technical Assistance 1-888-865-3026 For warranty information, visit www.lghvac.com.
Page 208
20001747 ISO 9001: 2008 LG ELECTRONICS INC. LG Customer Information Center, Commercial Products 1-888-865-3026 USA LG Electronics, U.S.A., Inc. Follow the prompts for commercial A/C products and parts. Air Conditioning Technologies 4300 North Point Parkway IM_MultiF_StdWallMount_9HVT_HSV5_11_18 Alpharetta, Georgia 30022 Supersedes: IM_MultiF_StdWallMount_11_15 www.lghvac.com...
Page 209
MULTI MULTI STANDARD WALL-MOUNTED INDOOR UNIT INSTALLATION MANUAL Models: LMN079HVT 7 kBtu LSN090HSV5 9 kBtu LSN120HSV5 12 kBtu LMN159HVT 15 kBtu LSN180HSV5 18 kBtu LMN249HVT 24 kBtu...
Page 236
MULTI Flaring Procedure One of the main causes of refrigerant leaks is a defective connection. For LG HVAC systems, the installer needs to know how perform flared connections successfully. • During installation, it is imperative to keep the piping system free of contaminants and debris such as copper burrs, slag, or carbon dust.
Page 246
Ensure all refrigerant piping is insulated. Exposed refrigerant piping will cause burns if touched. Wrap all refrigerant and condensate piping including field-provided isolation ball valves and flexible pipe connection kits provided by LG. All pipes must be insulated and each pipe must be separately wrapped. Any exposed piping will generate condensate or will cause burns if touched.
Page 252
• If using the LG Controller / Extension cable and the length needs to be further extended, the LG Extension Kit (sold separately) must be used. A maximum of four (4) kits (up to 165 feet) can be used.
Page 262
(4) to five (5) feet above the finished floor. • It could be necessary to use a handy box that is sized in metric units, depending on the sensor model. Check with your LG representative to verify which size of handy box is needed for the sensor in question.
Page 271
Who to call for assistance Freight Damage and Unit Replacements Your LG Manufacturer Representative Missing Parts Your LG Manufacturer Representative Freight Damage and Unit Replacements Your LG Manufacturer Representative Received Wrong Indoor Unit Model Your LG Manufacturer Representative Installation, Startup, and Commissioning Technical Assistance 1-888-865-3026 For warranty information, visit www.lghvac.com.
Page 272
20001747 ISO 9001: 2008 LG ELECTRONICS INC. LG Customer Information Center, Commercial Products 1-888-865-3026 USA LG Electronics, U.S.A., Inc. Follow the prompts for commercial A/C products and parts. Air Conditioning Technologies 4300 North Point Parkway IM_MultiF_StdWallMount_9HVT_HSV5_11_18 Alpharetta, Georgia 30022 Supersedes: IM_MultiF_StdWallMount_11_15 www.lghvac.com...
Page 273
MULTI MULTI STANDARD WALL-MOUNTED INDOOR UNIT INSTALLATION MANUAL Models: LMN079HVT 7 kBtu LSN090HSV5 9 kBtu LSN120HSV5 12 kBtu LMN159HVT 15 kBtu LSN180HSV5 18 kBtu LMN249HVT 24 kBtu...
Page 300
MULTI Flaring Procedure One of the main causes of refrigerant leaks is a defective connection. For LG HVAC systems, the installer needs to know how perform flared connections successfully. • During installation, it is imperative to keep the piping system free of contaminants and debris such as copper burrs, slag, or carbon dust.
Page 310
Ensure all refrigerant piping is insulated. Exposed refrigerant piping will cause burns if touched. Wrap all refrigerant and condensate piping including field-provided isolation ball valves and flexible pipe connection kits provided by LG. All pipes must be insulated and each pipe must be separately wrapped. Any exposed piping will generate condensate or will cause burns if touched.
Page 316
• If using the LG Controller / Extension cable and the length needs to be further extended, the LG Extension Kit (sold separately) must be used. A maximum of four (4) kits (up to 165 feet) can be used.
Page 326
(4) to five (5) feet above the finished floor. • It could be necessary to use a handy box that is sized in metric units, depending on the sensor model. Check with your LG representative to verify which size of handy box is needed for the sensor in question.
Page 335
Who to call for assistance Freight Damage and Unit Replacements Your LG Manufacturer Representative Missing Parts Your LG Manufacturer Representative Freight Damage and Unit Replacements Your LG Manufacturer Representative Received Wrong Indoor Unit Model Your LG Manufacturer Representative Installation, Startup, and Commissioning Technical Assistance 1-888-865-3026 For warranty information, visit www.lghvac.com.
Page 336
20001747 ISO 9001: 2008 LG ELECTRONICS INC. LG Customer Information Center, Commercial Products 1-888-865-3026 USA LG Electronics, U.S.A., Inc. Follow the prompts for commercial A/C products and parts. Air Conditioning Technologies 4300 North Point Parkway IM_MultiF_StdWallMount_9HVT_HSV5_11_18 Alpharetta, Georgia 30022 Supersedes: IM_MultiF_StdWallMount_11_15 www.lghvac.com...
Page 337
MULTI MULTI WITH HEAT PUMP OUTDOOR UNIT INSTALLATION MANUAL Up to Eight Zones Multi-Zone Heat Pump Systems Multi F MAX 1.5 to 4.0 Tons Dual-, Tri-, and Quad-Zone Multi F...
Page 359
Installing Outdoor Units Indoors LG Multi F / Multi F MAX with LGRED outdoor units are engineered to be mounted outdoors and include technology designed to minimize the negative effects of winter weather’s freezing rain, sleet, and snow. Some building projects, however, necessitate placing the HVAC outdoor units indoors: •...
Page 367
LG offers, free of charge, LG Air Conditioner Technical Solution (LATS) software—a total design solution for LG air conditioning systems. To reduce the risk of designing an improper applied system or one that will not operate correctly, LG prefers that LATS software be used on all projects.
Page 368
LATS can generate an Excel GERP report that can imported into the LG SOPS pricing and ordering system.
Page 371
Always follow local codes when selecting and installing copper pipe and piping system components. Approved piping for use with LG HVAC products will be marked “R410 RATED” along the length of the pipe. Piping wall thickness must meet local code requirements and be approved for a maximum operating pressure of 551 psi. When bending piping, try to keep the number of bends to a minimum, and use the largest radii possible to reduce the equivalent length of installed piping;...
Page 376
Failure to do so will cause significant performance degradation. Proper leak checks must be performed. Using isolation valves does not automatically void any LG product warranty, however, a limited warranty will be voided in whole or part must any field supplied accessory fail in any way that causes product failure.
Page 379
Pipe Sleeves at Penetrations LG recommends that all pipe penetrations through walls, floors, and pipes buried underground be properly insulated and routed through an appropriate wall sleeve of sufficient size to prevent compression of refrigerant pipe insulation and promote free movement of the pipe within the sleeve.
Page 380
MULTI Flaring and Brazing Procedures One of the main causes of refrigerant leaks is a defective connection. For LG HVAC systems, the installer needs to know how perform both flared and brazed connections successfully. • During installation, it is imperative to keep the piping system free of contaminants and debris such as copper burrs, slag, or carbon dust.
Page 406
Installation From Indoor Units to Remote Controllers • Communication cable from indoor unit to remote controller(s) is to be LG supplied or field supplied 22 AWG, 3-conductor, twisted, stranded, unshielded. Wiring must comply with all applicable local and national codes.
Page 424
PCB Display The cycle data can be checked without using LG Monitoring View (LGMV) Diagnostic Software by pushing TACT-SW1 on some models. See below for the types of cycle information that will be displayed in LGMV. After first page is displayed, the second page will be subsequently displayed.
Page 437
IM_MultiF_MAX_LGRED_ODU_1HHV_480HHV_01_22 Supersedes: IM_MultiF_MAX_LGRED_ODU_1HHV_480HHV_11_21 IM_MultiF_MAX_LGRED_ODU_11_20 LG Electronics, U.S.A., Inc. IM_MultiF_MAX_LGRED_ODU_09_20 Air Conditioning Technologies IM_MultiF_MAX_LGRED_ODU_06_20 4300 North Point Parkway IM_MultiF_MAX_LGRED_ODU_04_20 Alpharetta, Georgia 30022 IM_MultiF_MAX_LGRED_ODU_05_18 www.lghvac.com...
Page 438
SINGLE ZONE HIGH EFFICIENCY, STANDARD, EXTENDED PIPE, AND MEGA WALL MOUNTED INSTALLATION MANUAL LS091HSV3, LS121HSV3, LS181HSV3, LS240HSV3 LS30 HV3, LS3 0HV3 LS240HLV, LS300HLV, LS3 0HLV LS090H V, LS120H V, LS180H V, LS240H V LS090HEV1, LS120HEV1, LS180HEV1, LS240HEV1 11 V LS090H V, LS120H V...
Page 467
Tube wall thickness should meet local code requirements and be approved for an operating pressure of 551 psi. If local code does not specify wall thickness, LG suggests using tube thickness per table below. When bending tubing, try to keep the number of bends to a minimum, and use the largest radii possible to reduce the equivalent length of installed pipe;...
Page 471
Pipe Sleeves at Penetrations LG requires that all pipe penetrations through walls, floors, and pipes buried underground be properly insulated and routed through an appropriate wall sleeve of sufficient size to prevent compression of refrigerant pipe insulation and free movement of the pipe within the sleeve (Figure 38).
Page 483
Mark all pipes at the point where the insulation jacket ends. Remove the jacket. Install field provided insulation on the run-out and main trunk pipes first. Install the LG-provided insulation plugs on the ends of all unused header ports. Peel the adhesive glue protector slip from the insulation jacket and install the clam-shell jacket over the fitting.
Page 485
Pipe Sleeves at Penetrations LG requires that all pipe penetrations through walls, floors, and pipes buried underground be properly insulated and routed through an appropriate wall sleeve of sufficient size to prevent compression of refrigerant pipe insulation and free movement of the pipe within the sleeve.
Page 512
Power wiring to the Single Zone outdoor unit was installed per all local electrical code requirements. Power wiring to the indoor unit was installed per all local electrical code requirements. LG-supplied cable was used between the indoor unit and its zone controller. No cables were spliced and no wire caps are present.
Page 513
20001747 ISO 9001: 2008 LG ELECTRONICS INC. LG Electronics, U.S.A., Inc. LG Customer Information Center, Commercial Products Commercial Air Conditioning Division 1-888-865-3026 USA 4300 North Point Parkway Follow the prompts for commercial A/C products. IM_WallMounted_All_11_15 Alpharetta, Georgia 30022 Supersedes IM_WallMounted_All_08_15 www.lg-vrf.com...
Need help?
Do you have a question about the MULTI F L4L48W07121224 and is the answer not in the manual?
Questions and answers