Important Notes; Specifications - AKG K 206 AFC User Instructions

K 206 AFC
6.6 POWER ON/CHARGE LED Indications
CHARGE POWER ON
OFF
LIT
OFF

7 Important Notes

1. Operating switches on or connecting the transmitter to
your audio source may cause clicks which at high volume
settings may affect your hearing. Therefore, be sure to set
the VOLUME control on the headphones to minimum
before switching between different sources (tuner,
turntable, CD player, etc.) or connecting the transmitter.
2. Listening over headphones at high volume levels, particu-
larly over extended periods of time, may damage your
hearing.
3. Your K 206 AFC is a radio frequency device that conforms
to the strict European standards. For physical reasons
that have nothing to do with the quality of the product,
extremely strong interference sources may affect recep-
tion.
In order to maintain interference-free listening pleasure,
do not operate your K 206 AFC in the close vicinity of
radio equipment, cellular telephones, or directly above TV
or computer monitor picture tubes (see fig. 12). The sup-
plied connecting cable is long enough to allow the trans-
10
Status
Transmitter is con-
nected to AC
power and audio
LIT source and
receives signal.
Headphones are
not on the trans-
mitter, charging
function is off.
Transmitter is con-
nected to AC
power.
OFF Headphones are
on the transmitter,
charging function
is on.
Transmitter has
detected no signal
for several min-
utes, headphones
OFF are not on the
transmitter, charg-
ing function is off,
OR transmitter is
not connected to
AC power.
mitter to be placed at a safe distance from interference
sources.
Interference caused by other users of the same frequency
band is beyond AKG's control.

8 Specifications

System Performance
Modulation:
Carrier frequency band:
Selectable carrier frequencies:
T 206 AFC Transmitter
Power supply:
Radiation angle:
Max. radiated power:
Max. range (free field*):
Weight:
K 206 AFC Headphones
Distortion:
Type:
Power supply:
Battery life:
Frequency range:
Max. SPL:
Weight (inc. of batteries):
* under ideal transmission conditions
This equipment in its 864 MHz version conforms to the stan-
dards listed in the Declaration of Conformity. To order a free
copy of the Declaration of Conformity, visit
http://www.akg.com or contact sales@akg.com.
FM
864 MHz (LPD band) or
916 MHz
FREQ 1: 863.5/915.5 MHz
FREQ 2: 864.0/916.0 MHz
FREQ 3: 864.5/916.5 MHz
12 VDC, 200 mA
approx. 360°
10 mW ERP (Equivalent
Radiated Power)
916 MHz: approx. 100 ft.
(30 m)
864 MHz: approx. 330 ft.
(100 m)
approx. 10 oz. (280 g)
<1%
semi-open dynamic
headphones
3 VDC (2 x 1.2 V, 550 mAh
AAA size NiMH recharge-
able batteries supplied)
approx. 15 hours (NiMH
rechargeable batteries)
18 Hz to 20,000 Hz
105 dB SPL
approx. 10 oz. (280 g)