Icom IC-A200 Instruction Manual page 10

E 4
~|
MEMORY OPERATION
E Programming notes
Blank channel
Switch operation
Note that "push" and "push and hold" performs different
functions at right.
The yoke-mounted channel switch cannot be used for
memory channel programming.
During memory channel programming, if no operation is
operates as following:
— Returns to normal operation.
Protect channel
To prevent accidental changes, required memory channels
can be specified as protected channels. Even if [=] is
pushed and held, the frequency content does not blink and
it cannot be changed. Your Icom Avionics Dealer can
activate and cancel this setting.
Mi Programming a memory
channel
The transceiver is equipped with 9 memory channels. You
can program often-used frequencies into them.
3) Push [=].
e Frequency content or " — — — — " blinks.
5) Push [CH] to return to normal operation.
NOTE: To program
other
memory — channels