Advertisement
Quick Links
Advertisement
Related Manuals for Nikon NIKKOR Z 40mm f/2
Summary of Contents for Nikon NIKKOR Z 40mm f/2
- Page 1 NIKKOR Z 40mm f/2 NIKKOR Z 40mm f/2 SE Repair Manual Ver.1.0...
- Page 2 Notations used in this Repair Manual ..............2 Safety precautions ....................4 Disclaimer of warranties and limitation of damages ..........6 Notification ......................6 Service Tools Nikon service tools ....................7 Standard service tools ....................7 Illustrated Service Parts List Parts Removal and Replacement Procedures Before disassembling the Product ................10 During the repair process ..................10...
- Page 3 AF Accuracy Inspection Process AF accuracy inspection ................... 21 Control Ring Inspection Process Control ring inspection ..................23...
- Page 4 Product on your own. This Repair Manual is subject to revision without notice. ● Failure to follow the repair instructions or to use appropriate Nikon parts or tools may cause fire or other safety issues and lead to personal injury or death.
- Page 5 The actual shape of this lens may differ from that of the NIKKOR Z 40mm f/2 SE. Product identification information The NIKKOR Z 40mm f/2 or NIKKOR Z 40mm f/2 SE serial number is written on the opposite side of the Product name as illustrated below.
- Page 6 Read this first ● No part of this Repair Manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. ● Illustrations shown in this Repair Manual may differ from the actual Product.
- Page 7 Product from being able to be attached and will cause problems when shooting. In such cases, accurate adjustments and repair will be required and it is recommended that you contact Nikon for service repairs. ● If the Product contains a lithium-ion battery, then inappropriate use, transportation, recycling, reuse, or disposal of the lithium-ion battery may cause a fire, explosion, or other damage or injury.
- Page 8 Safety policy and procedure ● All Product safety issues must be managed according to the following points. If any of the following conditions are visible, stop repairing the Product and contact Nikon’s customer service at www.nikonproductsupport.com. • There are burnt or melted components or traces on the outside of the Product, or other heat-related damage (including scorching on charging terminals or other connection terminals).
- Page 9 ● All the information, descriptions, materials, and products provided on or in connection with this Repair Manual are provided by Nikon on an "as-is basis" and "in the form that can only be provided if possible'' unless otherwise expressly specified in writing by Nikon. With...
- Page 10 This section shows the tools used to repair products. The standard service tools are commercially available and can be purchased from third party retailers. Nikon hereby disclaims all responsibility and liability for any tools or other items purchased from third party retailers.
- Page 11 (143K0) or No.18 LENS UNIT (143KY). ● When disassembling and reassembling the Product, be careful not to damage or lose the parts. NIKKOR Z 40mm f/2 NIKKOR Z 40mm f/2 NIKKOR Z 40mm f/2 SE NIKKOR Z 40mm f/2 SE...
- Page 12 Item code Parts name Q'ty 134VX COVER RING UNIT 6A-17040FA SCREW 133RK FILTER RING UNIT 134W7 MF RING UNIT 13G47 COVER RING UNIT 13G24 FILTER RING 135XW RUBBER RING 136XX CONTROL RING UNIT 128UJ CONTACT UNIT 137TN NAME RING UNIT 13P1C NAME RING UNIT 12L6S...
- Page 13 Parts Removal and Replacement Procedures Before disassembling the Product ● As for the Product powered on by the power switch, before disassembling the Product, be sure to check that the Product is powered off and that the battery has been removed. ●...
- Page 14 Reference Pages for Replacement Procedures by Major Parts FILTER RING UNIT Disassembly P.12 Assembly P.17 - P.18 MOUNT Disassembly P.13 Assembly P.16 CONTACT UNIT Disassembly P.13 - P.14 Assembly P.15 - P.16 LENS UNIT Disassembly P.12 - P.13 Assembly P.16, P.18...
- Page 15 If it is difficult to peel it off, apply isopropyl ە alcohol into the gap around the outer periphery. FILTER RING SCREW (6A-17040FA) NIKKOR Z 40mm f/2 SE NIKKOR Z 40mm f/2 FILTER RING (13G24) FILTER RING RUBBER RING UNIT (133RK)
- Page 16 REAR COVER RING REAR COVER RING (133RV) SCREW (12L6S) x 3 SCREW (119KA) MOUNT SCREW (1K010-820) x 4 MOUNT (12J8K) WASHER...
- Page 17 NAME RING UNIT NAME RING UNIT (137TN) CONTACT UNIT CONTACT UNIT (128UJ)
- Page 18 Assembly CONTACT UNIT CONTACT UNIT (128UJ) NAME RING UNIT NAME RING UNIT (137TN) OS-30MHP MDF-400T...
- Page 19 MOUNT SCREW (1K010-820) x 4 0.22 N• m MOUNT (12J8K) WASHER REAR COVER RING REAR COVER RING (133RV) SCREW (12L6S) x 3 0.1 N• m SCREW (119KA) 0.1 N• m...
- Page 20 FILTER RING MDF-400T FG-600T OS-30MHP MF RING UNIT (134W7) OS-30MHP FILTER RING UNIT (133RK)
- Page 21 Marking SCREW (6A-17040FA) x 3 0.14 N• m NIKKOR Z 40mm f/2 SE FILTER RING NIKKOR Z 40mm f/2 (13G24) FILTER RUBBER RING UNIT RING (133RK) (135XW) CONTROL MF RING Index RING UNIT UNIT (136XX) (134W7) Reference position for mounting...
- Page 22 • Focus charts can be purchased at stores that sell camera-related products or online stores that sell camera-related products. • Nikon hereby disclaims all responsibility and liability for any focus charts or other items purchased from third party retailers. Camera settings ●...
- Page 23 ● Active D-Lighting: OFF ● Diffraction correction: ON ● Automatic distortion correction: ON ● Vignette control: Standard ● Body VR: OFF ● Exposure delay mode: one to two seconds ● AF fine adjustment: OFF Shooting environment Install the camera/lens and chart, referring to the figure below. Shoot in a location that meets the following requirements: ●...
- Page 24 AF accuracy inspection Follow the steps below to inspect the AF accuracy. Inspection procedure Adjust the camera position 1. Adjust the shooting distance so that the entire focus chart is displayed on the screen as shown in the image below. •...
- Page 25 Shoot the chart 1. Press the release button to shoot the target chart. 2. When checking before disassembling, check the inside of the red frame in the image, and record the focus position. 3. When checking after disassembling, confirm that there is no difference from the focus position recorded before disassembling.
- Page 26 Control Ring Inspection Process When performing repairs that involve disassembling or reassembling the mount, inspect the control ring. Tools and parts required: ● Your mirrorless camera Control ring inspection Follow the steps below to perform a control ring inspection. Inspection procedure Check the functions assigned to the control ring 1.
- Page 27 • If no function is set on the control ring, set one of the following functions. The setting names may differ depending on the camera model. Check the operation of the control ring 1. Rotate the lens control ring and check whether the assigned function is working. •...
- Page 28 No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Out of concern for the environment, Nikon is working to reduce its use of paper. © 2024 Nikon Corporation...
Need help?
Do you have a question about the NIKKOR Z 40mm f/2 and is the answer not in the manual?
Questions and answers