INFOSEC UPS SYSTEM E3 PERFORMANCE RT 800 VA Manual page 36

To activate EPO
function, remove
these two screws.

Step 6 - External battery connection
Connect the external battery to the UPS thanks to an optional battery connector (in case of
extended backup time).
NOTE: Maximum connected external battery boxes up to 4 units.
If connecting more one external battery box, it's requested to connect load at 80% of UPS
capacity.

Step 7 - Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
Note: The battery charges fully during the first five hours of normal operation. Do not expect
full battery run capability during this initial charge period.

Step 8 - Install software
For optimal computer system protection, refer to the InfoPower software CD to fully
configure UPS shutdown.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
36
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 06 17 AA 59 205 11
UPS
It's in closed status
for UPS normal
operation as
default.
Battery Box
Battery Box