INFOSEC UPS SYSTEM E3 PERFORMANCE RT 800 VA Manual page 34

Install UPS and external battery
NOTE: When installing the UPS or battery pack with feet, please keep 70mm distance from
the edge of the unit.
2.4 Setup the UPS

Step 1 - UPS input connection
Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension
cords.

Step 2 - UPS output connection
For socket-type outputs, there are two kinds of outputs: programmable outlets and general
outlets. Please connect non-critical devices to the programmable outlets and critical devices
to the general outlets. During power failure, you may extend the backup time to critical
devices by setting shorter backup time for non-critical devices.

Step 3 - Communication connection
Communication ports:
USB port
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
34
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 06 17 AA 59 205 11
RS-232 port Intelligent slot