Download
Share
Print this page
Cisco Catalyst IW9167E Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Catalyst IW9167E
  6. Hardware installation manual
Cisco Catalyst IW9167E Hardware Installation Manual

Cisco Catalyst IW9167E Hardware Installation Manual

Access point for hazardous location
Hide thumbs Also See for Catalyst IW9167E:

Advertisement

Quick Links

Download this manual
Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware
Installation Guide
First Published: 2024-11-21
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: 78-102210-01

Advertisement

loading
Need help?

Need help?

Do you have a question about the Catalyst IW9167E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cisco Catalyst IW9167E

Summary of Contents for Cisco Catalyst IW9167E

  • Page 1 Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide First Published: 2024-11-21 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: 78-102210-01...
  • Page 2 © 2024 Cisco Systems, Inc. All rights reserved.
  • Page 3 Unpacking Your Access Point Package Contents Unpacking the Access Point Cisco Orderable Accessories C H A P T E R 3 Installation Overview Performing a Preinstallation Configuration (Optional) Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 4 Troubleshooting the Access Point to Controller Join Process Important Information for Controller-based Deployments Configuring DHCP Option 43 C H A P T E R 6 Safety Guidelines and Warnings Safety Instructions Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 5 This Device Meets FCC Guidelines for Exposure to Radio Waves This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves Cet appareil est conforme aux directives internationales en matière d'exposition aux fréquences radioélectriques Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 6 Contents Additional Information on RF Exposure Declaration of Conformity Statements Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 7 Communications, Services, and Additional Information, on page viii About this Guide This guide provides instructions to install your Cisco Access Point and provides links to resources that can help you configure it. This guide also provides mounting instructions and troubleshooting information.
  • Page 8 Preface Related Documentation Related Documentation All user documentation for the Catalyst IW9167E Heavy Duty access point is available at the following URL: https://www.cisco.com/c/en/us/support/wireless/catalyst-iw9167-series/series.html For detailed information and guidelines about configuring and deploying your access point in a wireless network, see the following documentation: Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Cupertino 17.9.x...
  • Page 9 About Cisco Catalyst IW9167E for Hazardous Location Access Point The Cisco Catalyst IW9167E Heavy Duty Access Point is a tri-band 802.11ax (Wi-Fi 6) AP that provides reliable wireless connectivity for mission-critical applications as organizations automate processes and operations. It can operate as Wi-Fi 6 or Cisco Ultra-Reliable Wireless Backhaul (Cisco URWB). Wi-Fi 6 technology brings higher density, higher throughput, more channels, power efficiency, and improved security in industrial or outdoor locations.
  • Page 10 Cisco Catalyst IW9167E Heavy Duty Access Point Features Cisco Catalyst IW9167E Heavy Duty Access Point Features Cisco Catalyst IW9167E Heavy Duty Access Point is supported on Cisco Catalyst 9800 wireless controller-based products, and has the following features: • 2 GB DDR4 memory, 1 GB NAND Flash •...
  • Page 11 About Cisco Catalyst IW9167E for Hazardous Location Access Point Physical Specifications Port Access Plugs (3x)—M25 x1.5, 1/2"/ 13mm Hex Ground Lug Location The AP enclosure hardpoints for mounting. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 12 Impact Protection Bracket Note When GNSS Antenna is used, install the TNC connector L shape metal guard. A pressure vent is provided to maintan pressure within the enclosure. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 13 ¼-20 Hardpoints (4x)—1/4-20UNC-2B, 0.40" depth Pressure vent Connectors and Ports The following figures show the available ports and connectors on the AP. Figure 1: Catalyst IW9167EH-HZ Ports Antenna ports GNSS port Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 14 Tighten with maximum torque range: 35 to 40 lbf.in. 4-Pin Micro-Fit Connector for DC Power The following figures show the 4-pin Micro-Fit connector for DC power. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 15 Figure 4: Mating Connector Front View Molex Micro-Fit Pin Assignment Pin 1 Black ( - Negative Terminal) Pin 2 Not assigned Pin 3 White (+ Positive Terminal) Pin 4 Not assigned Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 16 About Cisco Catalyst IW9167E for Hazardous Location Access Point Power Sources Power Sources The Cisco Catalyst IW9167E Heavy Duty Access Point is supported on these power sources: • DC power input: 24 to 48 Vdc, 2.0 to 0.9 A Note Use DC cable with only No.
  • Page 17 SFP-10G-T-X is not in supported in Cisco IOS XE Release 17.9.3. Note SFP modules are not hot-swappable. When you plug and unplug the SFP module, a manual reload of the AP is required. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 18 Supported External Antennas, on page Supported External Antennas The following figure shows the antenna ports of the Catalyst IW9167E access point. Note • Antenna caps must be installed when an antenna is not in use. Tighten with maximum torque range: 2.5 lbf.in.
  • Page 19 Supports Bluetooth Low Energy (BLE) radio. Supports SIA. Port 5 Port 6 Supports 5/6 GHz radio in 4x4,2x2,1x1 Supports 5/6 GHz radio in 4x4,2x2 mode. mode. Supports SIA. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 20 Polarized, Self-Identifying AIR-ANT2547V-N= — – N male — Cisco Aironet Dual-Band Omnidirectional Dipole Antenna (White) AIR-ANT2547VG-N= — – N male — Cisco Aironet Dual-Band Omnidirectional Dipole Antenna (Gray) Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 21 – N female — Cisco Aironet Four-Port (x4) Dual-Band Polarization-Diverse Directional Panel Antenna AIR-ANT2513P4M-NS= — – N female Cisco Aironet Four-Port (x4) Dual-Band Polarization-Diverse Directional Panel Antenna, Self-Identifying Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 22 5 GHz Dual-Port Dual-Slant (x2) +/-45 Degree Polarized Directional Panel Antenna IW-ANT-PNL5615-NS= — N female Cisco 5/6 GHz 15 dBi (x2) Dual-Port Polarization Diverse Directional Panel Antenna, Self-Identifying Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 23 • The maximum antenna inductance shall not exceed 50 μH, and capacitance shall not exceed 0.01 μF. • Maximum cable length shall not exceed 150 ft. for any antenna. • If using a non-Cisco provided cable, the cable jacket must have a UL-certified UV rating. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide...
  • Page 24 About Cisco Catalyst IW9167E for Hazardous Location Access Point Supported External Antennas Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 25 Return the packing material to the shipping container and save it for future use. Step 3 Verify that you have received all items ordered. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. Cisco Orderable Accessories Order the following accessories separately from Cisco: •...
  • Page 26 • Lightning Arrestors Lightning Arrestor Description CGR-LA-NF-NF= Lightning Arrestor kit, N(f) connectors CGR-LA-NM-NF= Lightning Arrestor kit, N(m) to N(f) ACC-LA-G-TM-TF= Lightning Arrestor kit, TNC(m) to TNC(f) for GNSS Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 27 Performing a preinstallation configuration is an optional procedure. If your network controller is properly configured, you can install your AP in its final location and connect it to the network from there. The following illustration shows the preinstallation configuration setup: Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 28 Note If the AP remains in this mode for more than five minutes, the AP cannot find the primary Cisco Catalyst 9800 Series Wireless Controller. Check the connection between the AP and the Cisco Catalyst 9800 Series Wireless Controller and be sure that they are on the same subnet.
  • Page 29 If your AP does not indicate normal operation, turn it off and repeat the preinstallation configuration. Note When you are installing a Layer 3 access point on a subnet that is different from the Cisco Catalyst 9800 Series Wireless Controller, ensure the following setup is configured: •...
  • Page 30 MAC addresses from each location and return them to the person who is planning or managing your wireless network. Mounting the Access Point Mounting Hardware The Catalyst IW9167E access point has built-in mounting flanges. You can also use the following mounting hardware: • DIN rail mounting bracket • Pole mounting bracket Required mounting hardware depends on the mounting location: •...
  • Page 31 Choose the access point location that can safely support the weight of the access point. Step 2 Use the access point mounting holes as a template, and mark them at the mounting location. Main mounting flange Mounting holes Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 32 You can use DIN rail mounting in network or electrical closets or cabinets, or in wiring rooms that have low-levels of shock and vibration. Figure 6: DIN Rail Mounting Assembly, on page 25 shows the DIN rail and DIN rail mounting assembly. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 33 To DIN rail mount the access point: Procedure Step 1 Assemble the access point and DIN rail mounting bracket using the M6 hardware supplied as shown in the following figure. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 34 Position the access point assembly directly in front of the DIN rail. Step 3 Insert the DIN rail mounting bracket under the spring-loaded upper mounting clips. Note Ensure that the DIN rail seats into the anti-slip clips. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 35 M8 x 1.25 nuts and washers M8 x 1.25 U-bolt Pole mounting bracket Step 2 Use the included bolts, washers, and nuts to attach the access point to the mounting plate. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 36 Assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter you are using to mount the access point. The following image illustrates the pole diameter indicators and bolt holes on the pole clamp bracket. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 37 Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each strap bracket with two M8 x16 bolts (with lock washers), as the following image shows. Tighten the bolts to 13 to 15 ft lbs (17.6 to 20.3 N-m). Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 38 Banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) Ground lug (provided with access point) Crimping tool for ground lug, Panduit CT-720 with CD-720-1 die (http://onlinecatalog.panduit.com) #6 AWG ground wire Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 39 Position the pole clamp bracket on the pole as needed before tightening the metal bands. Note When the metal bands are tightened to the full tension, the pole clamp bracket cannot be adjusted unless the metal bands are cut or disassembled. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 40 Using the Mounting Bracket AIR-ACCPMK3700-2= Step 9 Tighten the metal bands using the banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) by following the operating instructions in the box with the tool. Ensure that the metal bands are as tight as possible.
  • Page 41 Installation Considerations Cisco recommends that you bulkhead mount the lightning arrestor so it can be installed as a wall-feed through on the wall of the protected space.
  • Page 42 This lightning arrestor is designed to be installed between the antenna cable that is attached to an outdoor antenna and the Cisco wireless device. You can install the lightning arrestor either indoors or outdoors. It can be connected directly to a wireless device having an external N connector. It can also be mounted inline or as a feed-through.
  • Page 43 Installation Overview Grounding the Access Point Cisco recommends a high-quality, low-loss cable for use with the lightning arrestor. Grounding the Access Point In all installations, after mounting the access point, you must properly ground the unit before connecting power cables.
  • Page 44 Length of the ground cable should not exceed 1 meter, and 0.5 meter is preferred. Use supplied oxide inhibitor on the grounded interface. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 45 Follow these steps to connect to the DC power port using certified Cable Gland or Flex Conduit (not supplied): Procedure Step 1 Remove the M25 plug. Separate the Gland Connector as per the manufacturers instructions and pass the DC cable through Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 46 Insert the grommet into the ferrule, and press it into the body. Step 5 Tighten the clamp nut onto the body until the grommet compresses onto the DC cable. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 47 Follow these steps to connect to the RJ-45 port using certified Cable Gland or Flex Conduit (not supplied): Procedure Step 1 Remove the M25 plug. Separate the Gland Connector as per the manufacturers instructions and slide the RJ-45 cable through it. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 48 Insert the grommet into the ferrule, and press it into the body. Step 5 Tighten the clamp nut onto the body until the grommet compresses onto the RJ-45 cable. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 49 Copper SFP or Fiber SFP will be detected by the system only after a power cycle. Procedure Step 1 Insert the fiber SFP into the chassis. Step 2 Disassemble the fiber adapter and slide parts over fiber cable. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 50 Insert the grommet into the ferrule, and press it into the adapter body. Step 6 Tighten the clamp nut onto the adapter body until the grommet compresses onto the fiber cable. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 51 Installation Overview Connecting to SFP Port Using Cable Gland SFP port connected using cable gland RJ-45 port connected using cable gland DC power port connected using cable gland Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 52 Installation Overview Connecting to SFP Port Using Cable Gland Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 53 Checking the Access Point LEDs, on page 46 Controller Discovery Process The Cisco AP must join a controller to function as an AP and start serving clients. Cisco uses a process called controller discovery process to join a controller. The devices use Lightweight Access Point Protocol (LWAPP) to communicate with each other.
  • Page 54 When an AP receives an IP address and DNS information from a DHCP server, it contacts the DNS to resolve CISCO-CAPWAP-CONTROLLER.localdomain. When the DNS sends a list of controller IP addresses, the AP sends discovery requests to the controllers.
  • Page 55 This status indicates that an Ethernet link is not operational. Cycling through Red, Green, This is a general warning of insufficient inline power. and Amber Cisco URWB OS Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 56 In the state of requesting IP address from DHCP server. (Provisioning) mode: Fallback Limbo Amber This status indicates that the IP address is retrieved (Provisioning) from DHCP server. mode: DHCP Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 57 AP. If the FIPS flag is set, the console access is disabled. • The AP status LED changes to solid red, and all the files in the AP storage directory are cleared. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 58 Layer 3, DHCP, DNS, or IP subnet broadcast. • The AP console port is enabled for monitoring and debugging purposes. All configuration commands are disabled when the AP is connected to a controller. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 59 The following is a DHCP Option 43 configuration example on a Microsoft Windows 2003 Enterprise DHCP server for Cisco Catalyst lightweight APs. For other DHCP server implementations, consult the product documentation to configure DHCP Option 43. In Option 43, use the IP address of the controller management interface.
  • Page 60 The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex f1080a7e7e020a7f7f02.
  • Page 61 Avoiding Damage to Radios in a Testing Environment, on page 56 • Performing Site Surveys, on page 57 Safety Instructions The translated warnings are available in the Translated Safety Warnings for Cisco Catalyst Access Points, which is available on Cisco.com. Warning Statement 1071 Warning Definition...
  • Page 62 The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco antennas, Cisco Catalyst products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio device according to the instructions in this publication results in user exposure substantially below the FCC recommended limits.
  • Page 63 If an accident should occur, call for qualified emergency help immediately. Safety Precautions when Installing Antennas • Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the size and type of antenna that you are about to install •...
  • Page 64 0 dBm. Never exceed 0 dBm, or damage to the AP can occur. Using attenuators, combiners, and splitters having a total of at least 60 dB of attenuation ensures that the receiver is not damaged and that PER performance is not degraded. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 65 • Have you configured the APs before you go onsite? It is always easier to resolve configurations or device problems first. • Do you have the proper tools and equipment to complete your survey? Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 66 Safety Guidelines and Warnings Performing Site Surveys Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 67 SAVE THESE INSTRUCTIONS Warning Statement 1017 Restricted Area This unit is intended for installation in restricted access areas. Only skilled, instructed, or qualified personnel can access a restricted access area. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 68 For safety and to achieve a good installation, please read and follow these safety precautions: • Cisco Catalyst IW9167E Heavy Duty Access Points are only intended to be installed vertically with antennas facing up. Any other mounting orientation will compromise the IP66/67 and type 4X ingress ratings required for safety and hazardous locations compliance.
  • Page 69 In order to prevent an electro static discharge within a hazardous location, only touch with an insulating object or use means to continuously drain off electrostatic charges in the installation. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 70 • Transient protection shall be provided that is set at a level not exceeding 140 % of the peak rated voltage value at the supply terminals to the equipment”. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 71 UL 60079-31, 2nd Edition, IEC 60079-0, Edition 7 IEC 60079-7, Edition 5.1 IEC 60079-11, Edition 6 IEC 60079-31, Edition 3 GB 3836.1-2010 GB 3836.3-2010 GB 3836.4-2010 GB 3836.9-2014 Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 72 II 3G Ex ic ec IIC T4 Gc II 3D Ex ic tc IIIC T90°C Dc Ex ic ec IIC T4 Gc Ex ic tc IIIC T90°C Dc UL 24 ATEX 3310X IECEx UL 24.0093X Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 73 Declaration of Conformity Statements, on page 73 Manufacturers Federal Communications Commission Declaration of Conformity Statement Access Point Models Certification Number IW9167EH–B LDKIW9167EH Manufacturer: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 74 2. This device must accept any interference received, including interference that may cause undesired operation. Note Cisco Catalyst IW9167EH-Z Access Points: Supports operation in indoor bands starting from 5150-5350MHz . Outdoor operation is strictly prohibited in 5150-5350MHz . Outdoor operation is allowed in the frequency bands starting from 5500-5825MHz...
  • Page 75 VCCI-A Guidelines for Operating Cisco Catalyst Access Points in Japan This section provides guidelines for avoiding interference when operating Cisco Catalyst access points in Japan. These guidelines are provided in both Japanese and English. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide...
  • Page 76 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.Les utilisateurs êtes avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 77 This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate Compliance. Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide...
  • Page 78 Operation of Cisco Catalyst Access Points in Brazil The product carries the CE Mark: Operation of Cisco Catalyst Access Points in Brazil This section contains special information for operation of Cisco Catalyst access points in Brazil. Access Point Models Certification Number...
  • Page 79 This section contains information on compliance with guidelines related to RF exposure. Generic Discussion on RF Exposure The Cisco products are designed to comply with the following national and international standards on Human Exposure to Radio Frequencies: • US 47 Code of Federal Regulations Part 2 Subpart J •...
  • Page 80 Cet appareil de la gamme Catalyst IW9167EH comprend un émetteur-récepteur radio. Il a été conçu de manière à respecter les limites en matière d'exposition aux fréquences radioélectriques (champs électromagnétiques Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...
  • Page 81 Additional Information on RF Exposure You can find additional information on the subject at the following links: • Cisco Systems Spread Spectrum Radios and RF Safety white paper at this URL: http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/rfhr_wi.htm • FCC Bulletin 56: Questions and Answers about Biological Effects and Potential Hazards of Radio Frequency Electromagnetic Fields •...
  • Page 82 Declarations of Conformity and Regulatory Information Declaration of Conformity Statements Cisco Catalyst IW9167E Access Point for Hazardous Location Hardware Installation Guide 78-102210-01...

This manual is also suitable for:

Catalyst 9800 series