AKG C 400 BL User Instructions page 21

2.2. Repainting the Microphone
If the microphone is too conspicuous at its final loca-
tion, you may repaint it in the color of the surface it will
be mounted on. Paint the microphone case in a well-
ventilated room and be sure to observe the instructions
provided by the paint manufacturer. When using spray
paints, wear a respirator and use a spray booth.
Fig. 8
1. Use a screwdriver to unsnap the bottom plate as
shown in fig. 8 and remove the bottom plate.
2. Referring to fig. 9, use a screwdriver to carefully
unsnap the circuit board carrying the microphone
element. Remove the circuit board.
Fig. 9
C
B
A
21