OWC Thunderbolt Go Dock Support Manual page 7

The OWC Thunderbolt Go Dock requires a driver to work properly with Windows or
Linux. Locate your operating system and download the appropriate driver by
visiting Realtek Driver Support
instructions for completing the driver download.
Device Management
3.1 Unmounting Drives
To ensure no data is lost during normal use, always eject or unmount the
corresponding disk(s) from your operating system before powering off the device.
Unmounting options are provided below.
OWC Dock Ejector
This application safely ejects all drives connected to the OWC Thunderbolt Go Dock
with a single click, adding peace of mind to fast-paced mobile workflows. To install
this app, please follow the steps below.
NOTE : Enables support for the Apple Super Drive, Apple USB Keyboard, and
charging for iPad 1/2/3 generation devices on the dock's 'high-power' ports. This
application includes a driver that enables support for these devices and charging
functions.
1. Download the installer file for Mac or Windows:
go.owc.com/dockejector
2. Launch the installer and follow the prompts. No restart is required.
3. Once the app is running an icon like the one shown below will appear in the macOS
menubar, or, System Tray on Windows. Clicking on the icon will provide options to
unmount the OWC Gemini.
4. Full user manual can be viewed by visiting
go.owc.com/dockejector/manual
Manually Unmounting Drives
macOS
• Drag the icon for the device you wish to unmount to the trash can; OR
• Right-click the device icon on the desktop, then click "Eject"; OR
Users are instructed to finish the on-screen